Navigation

SuperServer – 2U

SuperServer-2U

SuperServer 2028U-TN24R4T+ (Complete System Only)

• Up to 24x NVMe drives supported
• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 2x PCI-E 3.0 x16 (2x FH, 10.5″ L),
    1x PCI-E 3.0 x8 (LP) slots
  4. 4x 10GBase-T ports
  5. 24x NVMe Hot-swap 2.5″ drive bays
    (4 Hybrid ports – optional SAS3
    supported via AOC); 2x rear
    SATA3 Hot-swap 2.5″ drive bays
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1600W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-2028U-TN24R4T+ • SuperServer 2028U-TN24R4T+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x 10GBase-T ports via AOC-2UR6N4-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 6x SATA3 (6Gbps) ports
SAS • 4x SAS3 ports support via optional AOC
NVMe • 24x NVMe ports
LAN • 4x 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-219UAC-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 27.76″ (705.3mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 (FH, 10.5″ L) slots
• 1x PCI-E 3.0 x8 (LP) slot
Drive Bays
Hot-swap • Total 26x Tool-less Hot-swap 2.5″ drive bays (Front: 24, Rear: 2): 4 x Hybrid (NVMe/SATA3) ports – Optional SAS3 support via AOC
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1600W Redundant Titanium Level AC Power Supplies with PMbus
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 83.3A & Min: 0A (100Vac-127Vac)
• Max: 133A & Min: 0A (200Vac-240Vac)
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 2028U-TNR4T+ (Complete System Only)

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 6x PCI-E 3.0 x8 slots (4x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 4x 10GBase-T ports
  5. 24x Hot-swap 2.5″ Drive Bays: Default 8x SATA3 ports and 4x NVMe ports; Optional 24x SAS3 ports via AOC
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-2028U-TNR4T+ • SuperServer 2028U-TN24R4T+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x 10GBase-T ports via AOC-2UR6N4-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 8x SATA3 (6Gbps) ports
SAS • 24x SAS3 ports support via optional Add-on Cards
NVMe • 4x NVMe ports
LAN • 4x 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-219UAC-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 27.76″ (705.3mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 6x PCI-E 3.0 x8 slots (4x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 4x 2.5″ Hot-swap drive bays
• Default 8x SATA3 ports and 4x NVMe ports
• Optional 24x SAS3 ports via AOC
Note: optional storage card is required to support more than 10 drives.
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 2028U-TNRT+ (Complete System Only)

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 7x PCI-E 3.0 x8 slots (5x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 2x 10GBase-T ports
  5. 24x Hot-swap 2.5″ Drive Bays:
    Default 8x SATA3 ports and
    4x NVMe ports;
    Optional 24x SAS3 ports via AOC
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-2028U-TNRT+ • SuperServer 2028U-TNRT+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 2x 10GBase-T ports via AOC-2UR8N4-i2XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 8x SATA3 (6Gbps) ports
SAS • 24x SAS3 ports support via optional Add-on Cards
NVMe • 4x NVMe ports
LAN • 2x 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-219UAC-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 27.76″ (705.3mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 7x PCI-E 3.0 x8 slots (4x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 4x 2.5″ Hot-swap drive bays
• Default 8x SATA3 ports and 4x NVMe ports
• Optional 24x SAS3 ports via AOC
Note: optional storage card is required to support more than 10 drives.
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 2028U-E1CNR4T+ (Complete System Only)

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 6x PCI-E 3.0 x8 slots (4x FH, 10.5″
    L, 1x LP, 1x Internal LP)
  4. 4x 10GBase-T ports
  5. 24x Hot-swap 2.5″ Drive Bays: Default
    4x NVMe ports; 24x SAS3 ports via
    Expander and AOC: AOC-S3108L-H8iR,
    AOC-S3008L-L8e, AOC-S3008L-L8i
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-2028U-E1CNR4T+ • SuperServer 2028U-E1CNR4T+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x 10GBase-T ports via AOC-2URN4-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SAS • 24x SAS3 ports support via expander and storage Add-on Cards
• One of the following storage Add-on cards required:
AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)
NVMe • 4x NVMe ports
LAN • 4x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-219UE1C4-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 27.76″ (705.3mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • Up to 6x PCI-E 3.0 x8 slots (4x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 24x 2.5″ Hot-swap drive bays
• Default 4x NVMe ports
• 24x SAS3 ports support via Expander and AOC
Note: optional storage card is required to support more than 10 drives.
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Shroud • 1x Air Shroud
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 2028U-E1CNRT+ (Complete System Only)

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. Up to 7x PCI-E 3.0 x8 slots (up to 5x FH,
    10.5″ L, 1x LP, 1x Internal LP)
  4. 2x 10GBase-T ports
  5. 24x Hot-swap 2.5″ Drive Bays: Default
    4x NVMe ports; 24x SAS3 ports via
    Expander and AOC: AOC-S3108L-H8iR,
    AOC-S3008L-L8e, AOC-S3008L-L8i
  6. 4x heavy duty fans w/ optimal fan speed control; 1x air shroud
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-2028U-E1CNRT+ • SuperServer 2028U-E1CNR4T+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 2x 10GBase-T ports via AOC-2UR8N4-i2XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SAS • 24x SAS3 ports support via expander and storage Add-on Cards
• One of the following storage Add-on cards required:
AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)
NVMe • 4x NVMe ports
LAN • 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-219UE1C4-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 27.76″ (705.3mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • Up to 7x PCI-E 3.0 x8 slots (up to 5x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 24x 2.5″ Hot-swap drive bays
• Default 4x NVMe ports
• 24x SAS3 ports support via Expander and AOC
Note: optional storage card is required to support more than 10 drives.
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Shroud • 1x Air Shroud
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 2028U-TR4T+ (Complete System Only)

logo_Global_SKU_140x140

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 1x PCI-E 3.0 x16 slot (FH, 10.5″ L),
    6x PCI-E 3.0 x8 slots (4x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 4x 10GBase-T ports
  5. 24x Hot-swap 2.5″ Drive Bays:
    10x SATA3 ports by default;
    Optional drive support: 24x SAS3
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-2028U-TR4T+ • SuperServer 2028U-TR4T+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x 10GBase-T ports via AOC-2UR6-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 24x SAS3 ports support via optional Add-on Cards
LAN • 4x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-219UE1C4-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 27.76″ (705.3mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 slot (FH, 10.5″ L)
• 6x PCI-E 3.0 x8 slots
(4x FH, 10.5″ L, 1x LP, 1x Internal LP
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 24x Hot-swap 2.5″ Drive Bays:
• 10x SATA3 ports by default
Optional drive support: 24x SAS3
Note: optional storage card is required to support more than 10 drives.
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 5°C to 40°C (41°F to 104°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 2028U-TR4+ (Complete System Only)

logo_Global_SKU_140x140

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 1x PCI-E 3.0 x16 slot (FH, 10.5″ L),
    7x PCI-E 3.0 x8 slots (5x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 4x 10GBase-T ports
  5. 24x Hot-swap 2.5″ Drive Bays:
    10x SATA3 ports by default;
    Optional drive support: 24x SAS3
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-2028U-TR4+ • SuperServer 2028U-TR4+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x 10GBase-T ports via AOC-2UR6-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 24x SAS3 ports support via optional Add-on Cards
LAN • 4x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-219UE1C4-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 27.76″ (705.3mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 slot (FH, 10.5″ L)
• 7x PCI-E 3.0 x8 slots
(5x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 24x Hot-swap 2.5″ Drive Bays:
• 10x SATA3 ports by default
Optional drive support: 24x SAS3
Note: optional storage card is required to support more than 10 drives.
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 5°C to 40°C (41°F to 104°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 2028U-TRTP+ (Complete System Only)

logo_Global_SKU_140x140

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 1x PCI-E 3.0 x16 slot (FH, 10.5″ L),
    7x PCI-E 3.0 x8 slots (5x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 2x 10GBase-T ports
  5. 24x Hot-swap 2.5″ Drive Bays:
    10x SATA3 ports by default;
    Optional drive support: 24x SAS3
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-2028U-TRTP+ • SuperServer 2028U-TRTP+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 2x 10GBase-T ports via AOC-2UR6-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 24x SAS3 ports support via optional Add-on Cards
LAN • 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-219UE1C4-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 27.76″ (705.3mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 slot (FH, 10.5″ L)
• 7x PCI-E 3.0 x8 slots
(5x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 24x Hot-swap 2.5″ Drive Bays:
• 10x SATA3 ports by default
Optional drive support: 24x SAS3
Note: optional storage card is required to support more than 10 drives.
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 5°C to 40°C (41°F to 104°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 2028U-TRT+ (Complete System Only)

logo_Global_SKU_140x140

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 1x PCI-E 3.0 x16 slot (FH, 10.5″ L),
    7x PCI-E 3.0 x8 slots (5x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 2x 10GBase-T ports
  5. 24x Hot-swap 2.5″ Drive Bays:
    10x SATA3 ports by default;
    Optional drive support: 24x SAS3
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-2028U-TRT+ • SuperServer 2028U-TRT+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 2x 10GBase-T ports via AOC-2UR6-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 24x SAS3 ports support via optional Add-on Cards
LAN • 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-219UE1C4-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 27.76″ (705.3mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 slot (FH, 10.5″ L)
• 7x PCI-E 3.0 x8 slots
(5x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 24x Hot-swap 2.5″ Drive Bays:
• 10x SATA3 ports by default
Optional drive support: 24x SAS3
Note: optional storage card is required to support more than 10 drives.
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 5°C to 40°C (41°F to 104°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028UX-TR4 (Complete System Only)

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1TB ECC DDR4, up to
    2133MHz ; 16x DIMM slots
  3. 3x PCI-E 3.0 x16 slot (FH, 10.5″ L),
    3x PCI-E 3.0 x8 slots (1 in x16 FH
    10.5″ L, 1 LP, 1 Internal LP)
  4. 4x Gigabit Ethernet ports
  5. 12x Hot-swap 3.5″ Drive Bays:
    SATA3 default, 12x SAS3 opt.
    4x NVMe opt. via AOC
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-6028UX-TR4 • SuperServer 6028UX-TR4 (Black)
Motherboard
Super X10DRU-X
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 16x 288-pin DDR4 DIMM slots
• Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x Gigabit Ethernet ports via AOC-2UR68-i4G
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 12x SAS3 ports support via optional Add-on Card
NVMe • 4x NVMe ports support via optional Ultra Riser card (AOC-2UR8N4-i2XT)
LAN • 4x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-829UTS-R1K02P
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 25.5″ (647mm)
Weight • 36 lbs (16.4kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 3x PCI-E 3.0 x16 slot (FH, 10.5″ L)
• 3x PCI-E 3.0 x8 slots
(1 in x16 FH 10.5″ L, 1 LP, 1 Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 12x Hot-swap 3.5″ Drive Bays:
• 10x SATA3 ports by default
• Optional SAS3 support: 12x SAS3
• Optional NVMe support: 4x NVMe via AOC-2UR8N4-i2XT (2x 10GBase-T ports)
Note: optional storage card is required to support more than 10 drives.
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 5°C to 40°C (41°F to 104°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028U-TNR4T+ (Complete System Only)

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4, up to
    2133MHz ; 24x DIMM slots
  3. 6x PCI-E 3.0 x8 slots (4x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 4x Gigabit Ethernet ports
  5. 12x Hot-swap 3.5″ Drive Bays:
    Default 8x SATA3 ports,
    4x NVMe ports;
    Optional 12x SAS3 ports via AOC
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-6028U-TNR4T+ • SuperServer 6028U-TNR4T+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x 10GBase-T ports via AOC-2URN4-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 8x SATA3 (6Gbps) ports
SAS • 12x SAS3 ports support via optional Add-on Card
NVMe • 4x NVMe ports
LAN • 4x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-829UAC-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 28.46″ (723mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 6x PCI-E 3.0 x8 slots
(4x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 12x 3.5″ Hot-swap drive bays
• Default 8x SATA3 ports, 4x NVMe ports
• Optional 12x SAS3 ports via AOC
Note: optional storage card is required to support more than 10 drives.
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028U-TNRT+ (Complete System Only)

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4, up to
    2133MHz ; 24x DIMM slots
  3. 7x PCI-E 3.0 x8 slots (5x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 2x 10GBase-T ports
  5. 12x Hot-swap 3.5″ Drive Bays:
    Default 8x SATA3 ports,
    4x NVMe ports;
    Optional 12x SAS3 ports via AOC
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-6028U-TNRT+ • SuperServer 6028U-TNRT+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 2x 10GBase-T ports via AOC-2UR8N4-i2XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 8x SATA3 (6Gbps) ports
SAS • 12x SAS3 ports support via optional Add-on Card
NVMe • 4x NVMe ports
LAN • 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-829UAC-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 28.46″ (723mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 7x PCI-E 3.0 x8 slots
(5x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 12x 3.5″ Hot-swap drive bays
• Default 8x SATA3 ports, 4x NVMe ports
• Optional 12x SAS3 ports via AOC
Note: optional storage card is required to support more than 10 drives.
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028U-E1CNR4T+ (Complete System Only)

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4, up to
    2133MHz ; 24x DIMM slots
  3. 6x PCI-E 3.0 x8 slots (4x FH, 10.5″
    L, 1x LP, 1x Internal LP)
  4. 4x 10GBase-T ports
  5. 12x Hot-swap 3.5″ Drive Bays: Default
    4x NVMe ports; 12x SAS3 ports via
    Expander and AOC: AOC-S3108L-H8iR,
    AOC-S3008L-L8e, AOC-S3008L-L8i
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-6028U-E1CNR4T+ • SuperServer 6028U-E1CNR4T+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x 10GBase-T ports via AOC-2URN4-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SAS • 12x SAS3 ports support via expander and storage Add-on Cards
• One of the following storage Add-on cards required:AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)
NVMe • 4x NVMe ports
LAN • 4x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-829UAC-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 28.46″ (723mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • Up to 6x PCI-E 3.0 x8 slots
(4x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 12x 3.5″ Hot-swap drive bays
• Default 8x SATA3 ports, 4x NVMe ports
• Optional 12x SAS3 ports via AOC
Note: optional storage card is required to support more than 10 drives.
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028U-E1CNRT+ (Complete System Only)

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4, up to
    2133MHz ; 24x DIMM slots
  3. Up to 7x PCI-E 3.0 x8 slots (up to 5x FH,
    10.5″ L, 1x LP, 1x Internal LP)
  4. 2x 10GBase-T ports
  5. 12x Hot-swap 3.5″ Drive Bays: Default
    4x NVMe ports; 12x SAS3 ports via
    Expander and AOC: AOC-S3108L-H8iR,
    AOC-S3008L-L8e, AOC-S3008L-L8i
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-6028U-E1CNRT+ • SuperServer 6028U-E1CNRT+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 2x 10GBase-T ports via AOC-2UR8N4-i2XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SAS • 12x SAS3 ports support via expander and storage Add-on Cards
• One of the following storage Add-on cards required:AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)
NVMe • 4x NVMe ports
LAN • 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-829UAC-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 28.46″ (723mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • Up to 7x PCI-E 3.0 x8 slots
(up to 5x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 12x 3.5″ Hot-swap drive bays
• Default 4x NVMe ports
• 12x SAS3 ports via Expander and AOC
Note: optional storage card is required to support more than 10 drives.
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028U-TR4T+ (Complete System Only)

logo_Global_SKU_140x140

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4, up to
    2133MHz ; 24x DIMM slots
  3. 6x PCI-E 3.0 x8 slots (4x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 4x Gigabit Ethernet ports
  5. 12x Hot-swap 3.5″ Drive Bays:
    Default 8x SATA3 ports,
    4x NVMe ports;
    Optional 12x SAS3 ports via AOC
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-6028U-TR4T+ • SuperServer 6028U-TR4T+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x 10GBase-T ports via AOC-2URN4-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 12x SAS3 ports support via optional Add-on Card
NVMe • 4x NVMe ports
LAN • 4x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-829UAC-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 28.46″ (723mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 slot (FH, 10.5″ L)
• 6x PCI-E 3.0 x8 slots
(4x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 12x Hot-swap 3.5″ Drive Bays:
10x SATA3 ports by default
• Optional drive support: 12x SAS3
Note: optional storage card is required to support more than 10 drives.
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028U-TR4+ (Complete System Only)

logo_Global_SKU_140x140

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4, up to
    2133MHz ; 24x DIMM slots
  3. 1x PCI-E 3.0 x16 slot (FH, 10.5″ L),
    7x PCI-E 3.0 x8 slots (5x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 4x Gigabit Ethernet ports
  5. 12x Hot-swap 3.5″ Drive Bays:
    10x SATA3 ports by default;
    Optional drive support: 12x SAS3
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-6028U-TR4+ • SuperServer 6028U-TR4+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x 10GBase-T ports via AOC-2URN4-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 12x SAS3 ports support via optional Add-on Card
NVMe • 4x NVMe ports
LAN • 4x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-829UAC-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 28.46″ (723mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 slot (FH, 10.5″ L)
• 7x PCI-E 3.0 x8 slots
(5x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 12x Hot-swap 3.5″ Drive Bays:
10x SATA3 ports by default
• Optional drive support: 12x SAS3
Note: optional storage card is required to support more than 10 drives.
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 5°C to 40°C (41°F to 104°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028U-TRTP+ (Complete System Only)

logo_Global_SKU_140x140

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4, up to
    2133MHz ; 24x DIMM slots
  3. 1x PCI-E 3.0 x16 slot (FH, 10.5″ L),
    7x PCI-E 3.0 x8 slots (5x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 2x 10G SFP+ ports
  5. 12x Hot-swap 3.5″ Drive Bays:
    10x SATA3 ports by default;
    Optional 12x SAS3 support
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-6028U-TRTP+ • SuperServer 6028U-TRTP+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x 10GBase-T ports via AOC-2URN4-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 12x SAS3 ports support via optional Add-on Card
NVMe • 4x NVMe ports
LAN • 4x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-829UAC-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 28.46″ (723mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 slot (FH, 10.5″ L)
• 7x PCI-E 3.0 x8 slots
(5x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 12x Hot-swap 3.5″ Drive Bays:
10x SATA3 ports by default
• Optional drive support: 12x SAS3
Note: optional storage card is required to support more than 10 drives.
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028U-TRT+ (Complete System Only)

logo_Global_SKU_140x140

• Flexible Connectivity Options

  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4, up to
    2133MHz ; 24x DIMM slots
  3. 1x PCI-E 3.0 x16 slot (FH, 10.5″ L),
    7x PCI-E 3.0 x8 slots (5x FH, 10.5″ L,
    1x LP, 1x Internal LP)
  4. 2x 10GBase-T ports
  5. 12x Hot-swap 3.5″ Drive Bays:
    10x SATA3 ports by default;
    Optional drive support: 12x SAS3
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 1000W High efficiency (96%)
    Redundant PSU; Titanium Level

Product SKUs
SYS-6028U-TRT+ • SuperServer 6028U-TRT+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 2x 10GBase-T ports via AOC-2UR68-i2XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 12x SAS3 ports support via optional Add-on Card
NVMe • 4x NVMe ports
LAN • 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video • 1x VGA Connector
Serial Port / Header • 1x Serial header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 2U Rackmount
Model • CSE-829UAC-R1K02
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 28.46″ (723mm)
Weight • Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 slot (FH, 10.5″ L)
• 7x PCI-E 3.0 x8 slots
(5x FH, 10.5″ L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 12x Hot-swap 3.5″ Drive Bays:
10x SATA3 ports by default
• Optional drive support: 12x SAS3
Note: optional storage card is required to support more than 10 drives.
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 4x 8cm heavy duty PWM fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED • Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 5°C to 40°C (41°F to 104°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028R-WTR

logo_Global_SKU_140x140
  1.  Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. 8x 3.5″ Hot-swap SAS/SATA HDD
    bays for Customizable Storage
  3. Up to 1TB ECC DDR4, up to
    2133MHz ; 16x DIMM slots
  4. Riser card support up to:
    4x PCI-E 3.0 x8 (2 FHFL, 2 FHHL)
    2x PCI-E 3.0 (Low-profile) slots
  5. Intel® X540 Dual port 10GBase-T
  6. Integrated IPMI 2.0 and KVM with
    Dedicated LAN
  7. I/O ports: 2x SuperDOM, 1x VGA,
    2x COM, TPM 1.2, 6x USB 3.0 (4 rear,
    2 via header)
  8. 740W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-6028R-WTR • SuperServer 6028R-WTR (Black)
Motherboard
Super X10DRW-iT
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 16x 288-pin DDR4 DIMM slots
• Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • Intel® i350 Dual Port Gigabit Ethernet Controller
• Virtual Machine Device Queues reduce I/O overhead
• Supports 1GBASE-T, RJ45 output
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SAS/SATA • Customizable storage
LAN • 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 6x USB 3.0 ports (4 rear + 2 via header)
Video • 1x VGA Connector
Serial Port / Header • 1x Fast UART 16550 port / 1 Header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Chassis
Form Factor • 2U Rackmount
Model • CSE-825TQ-R740WB
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 25.5″ (648mm)
Weight • 52 lbs (23.6kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
• UID button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 4x PCI-E 3.0 x8 slots (2x Full-height Full-length, 2x Full-height Half-length)
• 2x PCI-E 3.0 slots (Low-profile)
• UIO AOC Compatibility Matrix
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 8x 3.5″ Hot-swap SAS / SATA HDD trays (ready for PCI-E storage controller card)
Backplane
• 1x 2U SAS backplane w/ Enclosure Management
(SAS support requires optional SAS controller)
Peripheral Drives
DVD-ROM • Slim DVD-ROM drive (optional)
System Cooling
Fans • 3x 80mm 7,000 RPM 4-pin PWM fans
Power Supply
• 740W (1+1) Redundant high-efficiency power supply with PMBus
AC Input • 100-240 V, 50-60 Hz, 9-3.5 Amp
DC Output • 4 Amp @ +5V standby
• 61.7 Amp @ +12V
Certification • Platinum Certified  
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028R-WTRT

logo_Global_SKU_140x140
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. 8x 3.5″ Hot-swap SAS/SATA HDD
    bays for Customizable Storage
  3. Up to 1TB ECC DDR4, up to
    2133MHz ; 16x DIMM slots
  4. Riser card support up to:
    4x PCI-E 3.0 x8 (2 FHFL, 2 FHHL)
    2x PCI-E 3.0 (Low-profile) slots
  5. Intel® X540 Dual port 10GBase-T
  6. Integrated IPMI 2.0 and KVM with
    Dedicated LAN
  7. I/O ports: 2x SuperDOM, 1x VGA,
    2x COM, TPM 1.2, 6x USB 3.0 (4 rear,
    2 via header)
  8. 740W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-6028R-WTRT • SuperServer 6028R-WTRT (Black)
Motherboard
Super X10DRW-iT
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 16x 288-pin DDR4 DIMM slots
• Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • Intel® X540 Dual Port 10GBase-T
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SAS/SATA • Customizable storage
LAN • 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 6x USB 3.0 ports (4 rear + 2 via header)
Video • 1x VGA Connector
Serial Port / Header • 1x Fast UART 16550 port / 1 Header
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Chassis
Form Factor • 2U Rackmount
Model • CSE-825TQ-R740WB
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 25.5″ (648mm)
Weight • 52 lbs (23.6kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
• UID button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 4x PCI-E 3.0 x8 slots (2x Full-height Full-length, 2x Full-height Half-length)
• 2x PCI-E 3.0 slots (Low-profile)
• UIO AOC Compatibility Matrix
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 8x 3.5″ Hot-swap SAS / SATA HDD trays (ready for PCI-E storage controller card)
Backplane
• 1x 2U SAS backplane w/ Enclosure Management
(SAS support requires optional SAS controller)
Peripheral Drives
DVD-ROM • Slim DVD-ROM drive (optional)
System Cooling
Fans • 3x 80mm 7,000 RPM 4-pin PWM fans
Power Supply
• 740W (1+1) Redundant high-efficiency power supply with PMBus
AC Input • 100-240 V, 50-60 Hz, 9-3.5 Amp
DC Output • 4 Amp @ +5V standby
• 61.7 Amp @ +12V
Certification • Platinum Certified  
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028R-TDWNR

• Data Center Optimized
• Support 4x 2.5″ NVMe Drive Bays

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 1TB ECC DDR4, up to
    2133MHz ; 16 DIMM slots
  3. 1x PCI-E 3.0 x16 (FHHL)
    2x PCI-E 3.0 x8 (FHHL)
    1x PCI-E 3.0 x8 (LP)
  4. 8x 3.5″ Hot-swap SATA3 +
    4x 2.5″ NVMe Drive Bays
  5. Intel® i350 Dual-Port 1GbE LAN
  6. I/O ports: 1x VGA, 2x USB 3.0,
    2x USB 2.0
  7. 920W Redundant Power Supplies
    Platinum Level Certified
  8. 2x SuperDOM (Disk on Module) ports
  9. IPMI 2.0 + KVM with Dedicated LAN

Product SKUs
SYS-6028R-TDWNR • SuperServer 6028R-TDWNR (Black)
Motherboard
Super X10DDW-iN
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 16x 288-pin DDR4 DIMM slots
• Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • Intel® i350 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 8x SATA3 (6Gbps) ports
• I-SATA 4 & I-SATA 5 support SATA DOM
NVMe • 4x Internal NVMe ports
LAN • 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 3x USB 3.0 ports (2 rear, 1 Type A)
• 4x USB 2.0 ports (2 rear, 2 headers)
Video • 1x VGA Connector
Serial Port / Header • 1x Fast UART 16550 port / 1 Header
DOM • 2x SuperDOM (Disk on Module) ports
Management
Software • IPMI 2.0
• Intel® Node Manager
• SuperDoctor® 5
• SSM
• SPM
• SUM
• Watch Dog
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Chassis
Form Factor • 2U Rackmount
Model • CSE-826BAC4-R920WB
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 25.5″ (648mm)
Package • 26.7″ (W) x 11.4″ (H) x 34.5″ (L)
Weight • 64 lbs (29.0 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
• Power fail LED
Expansion Slots
PCI-Express • 1 PCI-E 3.0 x16 (FHHL) slot
• 2 PCI-E 3.0 x8 (FHHL) slots
• 1 PCI-E 3.0 x8 (LP) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 8x 3.5″ Hot-swap SATA3 Drive Bays
• 4x 2.5″ NVMe Drive Bays
Backplane
• SAS3/SATA3 Backplane
• 4x 2.5″ NVMe drives
System Cooling
Fans • 3x 80mm 7,000 RPM 4-pin PWM fans
Power Supply
• 920W Redundant High-Efficiency Power Supplies w/ Power Distributor, PMBus 1.2, I2C, and PFC
AC Input • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output • +5V standby: 4A
• +12V: 75A
With Power Distributor • +5V: 45A
• +3.3V: 24A
• -12V: 0.6A
Certification • Platinum Certified  
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 5°C to 40°C (41°F to 104°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 2028GR-TR

logo_Global_SKU_140x140

• Up to 4 GPU

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 1TB ECC DDR4, up to
    2133MHz ; 16x DIMM slots
  3. 4x PCI-E 3.0 x16 slots (GPU/MIC, opt.),
    1x PCI-E 3.0 x8 (in x16) low-profile slot
  4. Intel® i350 Dual-Port GbE LAN
  5. 10x Hot-swap 2.5″ SATA Drive Bays
  6. 2000W Redundant Power Supplies
    Platinum Level (94%+)
  7. 5x heavy duty cooling fans
  8. Smart server management tools

Product SKUs
SYS-2028GR-TR • SuperServer 2028GR-TR (Black)
Motherboard
Super X10DRG-H
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU/Xeon Phi Support • K1/K10/K80/Xeon Phi
 System Memory
Memory Capacity • 16x 288-pin DDR4 DIMM slots
• Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • Intel® i350 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
LAN • 2x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 4x USB 3.0 ports (2 rear, 2 via header)
• 2x USB 2.0 ports (2 via headers)
Video • 1x VGA Connector
Serial Port / Header • 1x Fast UART 16550 port / 1 Header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Chassis
Form Factor • 2U Rackmount
Model • CSE-218GH-R2K03B
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 31″ (787mm)
Package • 26.5″ (H) x 11″ (W) x 44.5″ (D)
Weight • Net Weight: 39.5 lbs (17.9 kg)
• Gross Weight: 54 lbs (24.5 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
• Power fail LED
Expansion Slots
PCI-Express • 4x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards, option)
• 1x PCI-E 3.0 x8 (in x16) low-profile slot
Drive Bays
Hot-swap • 10x 2.5″ Hot-swap drive bays
System Cooling
Fans • 5x 8cm heavy duty fans with optimal fan speed control
Power Supply
• 2000W 1U Redundant Power Supply
AC Input • 1000W @ 100-120V, 12.5A Max., 50-60Hz
• 2000W @ 200-240V, 10A Max., 50-60Hz
DC Output • 1000W: +12V/83.3A; +12Vsb/3.5A
• 2000W: +12V/166.7A; +12Vsb/3.5A
Certification • Platinum Certified   94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • Total of five 4-pin PWM fans
• 5x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control
Temperature • Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 10x Fan Connectors
• PSU I2C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI
LED • Power Fail / Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • SDDC Support
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 5°C to 40°C (41°F to 104°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028R-T

• Cloud and Virtualization needs
• Compute Intensive Application
• Database Processing and Storage
• High Availability Storage
• Mission-critical Applications

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 1TB ECC DDR4, up to
    2133MHz ; 16x DIMM slots
  3. 3x PCI-E 3.0 x16, 3x PCI-E 3.0 x8 slots
  4. Intel® i350 Dual-Port GbE LAN
  5. Intel C612 controller for 8 SATA3
    ports; RAID 0, 1, 5, 10
  6. 6x 3.5″ Hot-swap SATA3 HDD Bays
  7. 650W High-efficiency Power Supply
    Gold Level

Product SKUs
SYS-6028R-T • SuperServer 6028R-T (Black)
Motherboard
Super X10DRi
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU/Xeon Phi Support • K1/K10/K80/Xeon Phi
 System Memory
Memory Capacity • 16x 288-pin DDR4 DIMM slots
• Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • Intel® i350 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 6x SATA3 (6Gbps) ports
• 2x SATA3 (6Gbps) ports onboard
• 2x SATA3 powered ports that support SATA DOM
LAN • 2x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • Rear USB: 2x USB 3.0 + 2x USB 2.0
• USB Header: 2x 3.0, 4x 2.0, 1x Type A
Video • 1x VGA port
Serial Port / Header • 1x COM Port
Management
Software • SuperDoctor® 5
• Watch Dog
• NMI, SPM, SUM
• IPMI 2.0
• Intel Node Manager
Power Configurations • ACPI / APM Power Management
• Power-on mode for AC power recovery
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Chassis
Form Factor • 2U Rackmount
Model • CSE-823TQ-653LPB
Dimensions and Weight
Width • 19″ (490mm)
Height • 3.5″ (89mm)
Depth • 27″ (680mm)
Package • 9.7″ (H) x 24″ (W) x 28″ (D)
Weight • Net Weight: 31 lbs (14.2 kg)
• Gross Weight: 51.5 lbs (23.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
• UID button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 3x PCI-E 3.0 x16 (Low-profile)
• 3x PCI-E 3.0 x8 (Low-profile)
Drive Bays
Hot-swap • 6x 3.5″ Hot-swap SATA HDD trays
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 4x 80cm hot-swap redundant PWM cooling fans
Power Supply
• 650W AC-DC High Efficiency Power Supply
AC Input • 100 – 140V, 8-5.2A 180-240V 4.2-3.1A, 50-60Hz
+5V • 30 Amp
+5V standby • 4 Amp
+12V • 100-140Vac 49Amp
• 180-240Vac 54Amp
-12V • 0.5 Amp
+3.3V • 25 Amp
Certification • Gold Certified 
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6028R-TR

logo_Global_SKU_140x140

• Cloud and Virtualization needs
• Compute Intensive Application
• Database Processing and Storage
• High Availability Storage
• Mission-critical Applications

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 1TB ECC DDR4, up to
    2133MHz ; 16x DIMM slots
  3. 3x PCI-E 3.0 x16, 3x PCI-E 3.0 x8 slots
  4. Intel® i350 Dual-Port GbE LAN
  5. Intel C612 controller for 8 SATA3
    ports; RAID 0, 1, 5, 10
  6. 8x 3.5″ Hot-swap SATA3 HDD Bays
  7. 740W Redundant Power Supplies
    Platinum Level (94% efficiency)

Product SKUs
SYS-6028R-TR • SuperServer 6028R-TR (Black)
Motherboard
Super X10DRi
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU/Xeon Phi Support • K1/K10/K80/Xeon Phi
 System Memory
Memory Capacity • 16x 288-pin DDR4 DIMM slots
• Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • Intel® i350 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 8x SATA3 (6Gbps) ports
• 2x SATA3 powered ports that support SATA DOM
LAN • 2x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • Rear USB: 2x USB 3.0 + 2x USB 2.0
• Front USB: 2x USB 2.0
• USB Header: 2x 3.0, 2x 2.0, 1x Type A
Video • 1x VGA Connector
Serial Port / Header • 2x Fast UART 16550 serial
• 2x COM Ports (1 rear, 1 header)
DOM • 2x SuperDOM (Disk on Module) ports
Management
Software • SuperDoctor® 5
• Watch Dog
• NMI, SPM, SUM
• IPMI 2.0
• Intel Node Manager
Power Configurations • ACPI / APM Power Management
• Power-on mode for AC power recovery
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Chassis
Form Factor • 2U Rackmount
Model • CSE-825TQ-R740LPB
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 25.5″ (647mm)
Package • 26″ (H) x 11″ (W) x 34.5″ (D)
Weight • Net Weight: 35.5 lbs (16 kg)
• Gross Weight: 69 lbs (31.2 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
• UID button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express • 3x PCI-E 3.0 x16 (Low-profile)
• 3x PCI-E 3.0 x8 (Low-profile)
Drive Bays
Hot-swap • 8x 3.5″ Hot-swap SATA HDD trays
Backplane
• 2U SAS/SATA backplane
System Cooling
Fans • 3x 80x80x38mm Counter-rotating PWM fans
Power Supply
• 740W (1+1) Redundant high-efficiency power supply with PMBus
AC Input • 100-240 V, 50-60 Hz, 9-3.5 Amp
DC Output • 4 Amp @ +5V standby
• 61.7 Amp @ +12V
Certification • Platinum Certified  
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 2028R-C1R4+

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4, up to
    2133MHz ; 24x DIMM slots
  3. 2x PCI-E 3.0 x16, 3x PCI-E 3.0 x8, and
    1x PCI-E 2.0 x4 (in x8) slot
  4. 8x 2.5″ SAS3 and 8x 2.5″ SATA3
    Hot-swap Drive Bays
  5. Quad GbE ports w/ Intel i350
  6. I/O ports: 2x SuperDOM, 1x VGA, 2x
    COM, 2x USB 3.0 (rear), 4x USB 2.0
    (2 rear, 2 front), 1x Type A
  7. 3x 8cm high-performance PWM fans
  8. 920W Redundant Power Supplies
    Platinum Level (94%)

Product SKUs
SYS-2028R-C1R4+ • SuperServer 2028R-C1R4+ (Black)
Motherboard
Super X10DRC-LN4+  link
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU/Xeon Phi Support • K1/K10/K80/Xeon Phi
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • Intel® i350 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 8x SAS3 (12Gbps) ports
• SuperCap option support
LAN • 4x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 2x USB 3.0 ports (rear)
• 4x USB 2.0 ports (2 rear, 2 front)
• 1x Type A
Video • 1x VGA Connector
Serial Port / Header • 2x Fast UART 16550 serial
• 2x COM Ports (1 rear, 1 front)
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• DMI 2.3
• PCI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• Hardware BIOS Virus protection
• SMBIOS 2.3
• UEFI
• RTC (Real Time Clock) Wakeup
Chassis
Form Factor • 2U Rackmount
Model • CSE-213AC-R920LPB
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 24.8″ (630mm)
Package • 10.5″ (H) x 26.5″ (W) x 38″ (D)
Weight • Net Weight: 38.5 lbs (17.5 kg)
• Gross Weight: 63.5 lbs (28.8 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
• Power fail LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16
• 3x PCI-E 3.0 x8
• 1x PCI-E 2.0 x4 (in x8)
Drive Bays
Hot-swap • 8x 2.5″ and 8x 2.5″ Hot-swap drive bays
System Cooling
Fans • 3x 8cm heavy duty fans with optimal fan speed control
Power Supply
• 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output • 4 Amp @ +5V standby
• 75 Amp @ +12V
Certification • Platinum Certified   94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
• CPU Core 6-Phase-switching voltage regulator
FAN • Total of five 4-pin PWM fans
• 5x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control
Temperature • Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 10x Fan Connectors
• PSU I2C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI
LED • Power Fail / Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • SDDC Support
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperStorage Server 2028R-NR48N (Complete System Only)

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4, up to 2133MHz ; 24x DIMM slots
  3. 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8
  4. SIOM for flexible networking options
  5. 48x 2.5″ Hot-swap NVMe bays;
    2x 2.5″ rear Hot-swap drive bays
  6. Server remote management: IPMI 2.0
    / KVM over LAN / Media over LAN
  7. 5x 8cm hot-swap redundant PWM fans
  8. 1600W Redundant Power Supplies Titanium Level (96%)

Product SKUs
SSG-2028R-NR48N • SuperServer 2028R-NR48N (Black)
Motherboard
Super X10DSC+  link
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU/Xeon Phi Support • K1/K10/K80/Xeon Phi
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • Intel® i350 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics • ASPEED AST2400 BMC
Input / Output
LAN • LAN ports via SIOM Add-On-Card:
(See SIOM Compatibility Matrix)
USB • 3x USB 3.0 ports (2 rear + 1 Type A)
Video • 1x VGA port
Serial Port / Header • 1x Fast UART 16550 port / 1 Header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3
• UEFI
Chassis
Form Factor • 2U Rackmount
Model • CSE-226STS-R1K62P1
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 30.2″ (767mm)
• With Cable Management Arm Installed: 35.2″ (895mm)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
• Power fail LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots
• 1x PCI-E 3.0 x8 slots
• Slot 3 Occupied by NVMe AOC
Drive Bays
Hot-swap • 48x 2.5″ Hot-swap NVMe drive bays
• 2x 2.5″ rear Hot-swap drive bays
Backplane
• Two 24 port NVMe backplanes, each supporting up to 24x 2.5″ NVMe SSDs
System Cooling
Fans • 5x 8cm hot-swap redundant PWM cooling fans
Power Supply
• 1600W Redundant Titanium Level AC Power Supplies with PMbus
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 83.3A & Min: 0A (100Vac-127Vac)
• Max: 133A & Min: 0A (200Vac-240Vac)
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level Certified  
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperStorage Server 2028R-ACR24H

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 1TB ECC DDR4, up to
    2133MHz ; 16x DIMM slots
  3. 1 PCI-E 3.0 x16, 6 PCI-E 3.0 x8
    (slot 1-3 occupied by controllers
  4. Dual 10GBase-T LAN w/ Intel® X540
  5. 24x 2.5″ Hot-swap SAS3/SATA3
    direct attached drive bays;
    2x 2.5″ optional hot-swap
    drive bays (rear)
  6. SAS3 via 3x LSI 3108 AOC (HW RAID)
  7. Server remote management: IPMI 2.0
    / KVM over LAN / Media over LAN
  8. 3x 8cm hot-swap redundant PWM fans
  9. 920W Redundant Power Supplies
    Platinum Level (94%)

Product SKUs
SSG-2028R-ACR24H • SuperServer 2028R-ACR24H (Black)
Motherboard
Super X10DRH-iT  link
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU/Xeon Phi Support • K1/K10/K80/Xeon Phi
 System Memory
Memory Capacity • 16x 288-pin DDR4 DIMM slots
• Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SAS • SAS3 (12Gbps) via LSI 3108 AOC; HW RAID
• 3x LSI 3108 controller
• RAID 0, 1, 5, 6, 10, 50, 60
SATA • SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • Intel® i350 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
LAN • 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 2x USB 3.0 ports (rear)
• 2x USB 2.0 ports (rear)
• 1x Type A
Video • 1x VGA port
Serial Port / Header • 1x Fast UART 16550 port / 1 Header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3
• UEFI
Chassis
Form Factor • 2U Rackmount
Model • CSE-216BAC-R920LPB
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 30.2″ (767mm)
• With Cable Management Arm Installed: 35.2″ (895mm)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
• Power fail LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 slot
• 6x PCI-E 3.0 x8 slots
• Slot 1-3 occupied by RAID controller
Drive Bays
Hot-swap • 24x 2.5″ Hot-swap SAS3/SATA3 HDD bays
• 2x 2.5″ rear Hot-swap drive bays
Backplane
• SAS3 12Gb/s direct attached storage backplane, w/ 24x SAS3 2.5″ drive slots
System Cooling
Fans • 3x 8cm hot-swap redundant PWM cooling fans
Power Supply
• 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output • 4 Amp @ +5V standby
• 75 Amp @ +12V
Certification • Platinum Certified  
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperStorage Server 6028R-E1CR16T

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 1TB reg. ECC DDR4, up to
    2133MHz ; 16x DIMM slots
  3. 1x PCI-E 3.0 x16, 6x PCI-E 3.0 x8
  4. Dual 10GBase-T LAN w/ Intel® X540
  5. 16x 3.5″ Hot-swap SAS3 drive bays;
    2x 2.5″ optional Hot-swap drive
    bays (rear)
  6. SAS3 via LSI 3108 controller, HW RAID
  7. Server remote management: IPMI 2.0
    / KVM over LAN / Media over LAN
  8. 4x 8cm hot-swap redundant PWM fans
  9. 1000W Redundant Power Supplies
    Titanium Level

Product SKUs
SSG-6028R-E1CR16T • SuperServer 6028R-E1CR16T (Black)
Motherboard
Super X10DRH-CT  link
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU/Xeon Phi Support • K1/K10/K80/Xeon Phi
 System Memory
Memory Capacity • 16x 288-pin DDR4 DIMM slots
• Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SAS • SAS3 (12Gbps) via LSI 3108 controllers; HW RAID
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • Intel® X540 Dual Port 10GbE
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SAS • 16x SAS3 (12Gbps) ports
LAN • 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 2x USB 3.0 ports (rear)
• 2x USB 2.0 ports (rear)
• 1x Type A
Video • 1x VGA port
Serial Port / Header • 1x Fast UART 16550 port / 1 Header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3
• UEFI
Chassis
Form Factor • 2U Rackmount
Model • CSE-829HTS-R1K02LPB
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 3.5″ (89mm)
Depth • 25.5″ (647mm)
Weight • Gross Weight: 58 lbs (26.3 kg)
• Net Weight: 34 lbs (15.4 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
• Power fail LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 slot
• 6x PCI-E 3.0 x8 slots
Drive Bays
Hot-swap • 16x 3.5″ Hot-swap SAS3 drive bays
Optional • 2x 2.5″ Hot-swap drive bays (rear)
Backplane
• SAS3 expander backplane
System Cooling
Fans • 4x 8cm hot-swap redundant PWM cooling fans
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V • Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB • Max: 2.1A
• Min: 0A
Certification • Titanium Level    
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

Top