E5-2600 v3 + C612 based FatTwin™ SuperServer / Socket R3 – LGA 2011 / DP Xeon
4U Xeon® E5-2600 v3 Family
The FatTwin is available in high-density 8 / 4 / 2 hot-plug system node configurations with a choice of memory capacities, hard disk drives, power supplies, front or rear I/O, PCI and networking options and more. Its high efficiency, highly effective shared cooling architecture allows the FatTwin to operate in high-temperature, free-air cooled environments up to 47°C, providing considerable cost savings and improved TCO. Versatile configurations allow the FatTwin to be optimized for many different environments including Data Center, Cloud Computing, and HPC; Engineering, Research, and GPU projects; File and Storage Server deployments; and General Server and Enterprise Server applications.
SuperServer F618R2-RTN+
 |
|
| Product SKUs | |
| SYS-F618R2-RTN+ | • SuperServer F618R2-RTN+ (Black) |
| Motherboard | |
| Super X10DRFR-N | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350-AM2 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 8x SATA3 (6Gbps) ports • 2x SATA3 powered ports that support SATA DOM |
| NVMe | • 2x Internal NVMe ports (PCI-E 3.0 x4) |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port / 1 Header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F418BC-R2K04B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 150 lbs (68.04 kg) • Gross Weight: 200 lbs (90.71 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1x PCI-E 3.0 x16 Low-profile • 1x PCI-E 3.0 x8 (Micro LP) • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • 6x 2.5″ Hot-swap SATA or 4x 2.5″ Hot-swap SATA + 2x SATA/NVMe hybrid |
| Backplane | |
| • 1x SAS/SATA backplane |
|
| System Cooling | |
| Fans | • 3x 4cm 14k RPM middle fans |
| Power Supply | |
| • 2000W Titanium Level (96%) High-efficiency Redundant Power Supplies |
|
| Total Output Power | • 1000W/1800W/1980W/2000W |
| AC Input | • 100-127 V, 50-60 Hz • 200-220 V, 50-60 Hz • 220-230 V, 50-60 Hz • 230-240 V, 50-60 Hz |
| +12V | • Max: 83.3A & Min: 0A (100Vac-127Vac) • Max: 150A & Min: 0A (200Vac-220Vac) • Max: 165A & Min: 0A (220Vac-230Vac) • Max: 166.7A & Min: 0A (230Vac-240Vac) |
| 5V SB | • Max: 1A / Min: 0A |
| Certification | • Titanium Level   |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F618R2-RTPTN+
|
|
| Product SKUs | |
| SYS-F618R2-RTPTN+ | • SuperServer F618R2-RTPTN+ (Black) |
| Motherboard | |
| Super X10DRFR-NT | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® X540 Dual Port 10GBase-T • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 8x SATA3 (6Gbps) ports • 2x SATA3 powered ports that support SATA DOM |
| NVMe | • 2x Internal NVMe ports (PCI-E 3.0 x4) |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port / 1 Header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F418BC-R2K04B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 150 lbs (68.04 kg) • Gross Weight: 200 lbs (90.71 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1x PCI-E 3.0 x16 Low-profile • 1x PCI-E 3.0 x8 (Micro LP) • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • 6x 2.5″ Hot-swap SATA or 4x 2.5″ Hot-swap SATA + 2x SATA/NVMe hybrid |
| Backplane | |
| • 1x SAS/SATA backplane |
|
| System Cooling | |
| Fans | • 3x 4cm 14k RPM middle fans |
| Power Supply | |
| • 2000W Titanium Level (96%) High-efficiency Redundant Power Supplies |
|
| Total Output Power | • 1000W/1800W/1980W/2000W |
| AC Input | • 100-127 V, 50-60 Hz • 200-220 V, 50-60 Hz • 220-230 V, 50-60 Hz • 230-240 V, 50-60 Hz |
| +12V | • Max: 83.3A & Min: 0A (100Vac-127Vac) • Max: 150A & Min: 0A (200Vac-220Vac) • Max: 165A & Min: 0A (220Vac-230Vac) • Max: 166.7A & Min: 0A (230Vac-240Vac) |
| 5V SB | • Max: 1A / Min: 0A |
| Certification | • Titanium Level |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F618R2-RC1+
|
8 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F618R2-RC1+ | • SuperServer F618R2-RC1+ (Black) |
| Motherboard | |
| Super X10DRFR-N | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SAS | • LSI 3108 SAS3 (12Gbps) controller; HW RAID 0, 1, 5, 6, 10, 50, 60 |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350-AM2 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SAS | • 6x SAS3 (12Gbps) ports |
| NVMe | • 2x Internal NVMe ports (PCI-E 3.0 x4) |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port / 1 Header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F418BC-R2K04B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 150 lbs (68.04 kg) • Gross Weight: 200 lbs (90.71 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1x PCI-E 3.0 x16 Low-profile • 1x PCI-E 3.0 x8 (Micro LP) • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • 6x 2.5″ Hot-swap SATA or 4x 2.5″ Hot-swap SATA + 2x SATA/NVMe hybrid |
| Backplane | |
| • 1x SAS/SATA backplane |
|
| System Cooling | |
| Fans | • 3x 4cm 14k RPM middle fans |
| Power Supply | |
| • 2000W Titanium Level (96%) High-efficiency Redundant Power Supplies |
|
| Total Output Power | • 1000W/1800W/1980W/2000W |
| AC Input | • 100-127 V, 50-60 Hz • 200-220 V, 50-60 Hz • 220-230 V, 50-60 Hz • 230-240 V, 50-60 Hz |
| +12V | • Max: 83.3A & Min: 0A (100Vac-127Vac) • Max: 150A & Min: 0A (200Vac-220Vac) • Max: 165A & Min: 0A (220Vac-230Vac) • Max: 166.7A & Min: 0A (230Vac-240Vac) |
| 5V SB | • Max: 1A / Min: 0A |
| Certification | • Titanium Level |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F618R2-RC1PT+
|
8 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F618R2-RC1PT+ | • SuperServer F618R2-RC1+ (Black) |
| Motherboard | |
| Super X10DRFR-NT | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SAS | • LSI 3108 SAS3 (12Gbps) controller; HW RAID 0, 1, 5, 6, 10, 50, 60 |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350-AM2 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SAS | • 6x SAS3 (12Gbps) ports |
| NVMe | • 2x Internal NVMe ports (PCI-E 3.0 x4) |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port / 1 Header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F418BC-R2K04B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 150 lbs (68.04 kg) • Gross Weight: 200 lbs (90.71 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1x PCI-E 3.0 x16 Low-profile • 1x PCI-E 3.0 x8 (Micro LP) • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • 6x 2.5″ Hot-swap SATA or 4x 2.5″ Hot-swap SATA + 2x SATA/NVMe hybrid |
| Backplane | |
| • 1x SAS/SATA backplane |
|
| System Cooling | |
| Fans | • 3x 4cm 14k RPM middle fans |
| Power Supply | |
| • 2000W Titanium Level (96%) High-efficiency Redundant Power Supplies |
|
| Total Output Power | • 1000W/1800W/1980W/2000W |
| AC Input | • 100-127 V, 50-60 Hz • 200-220 V, 50-60 Hz • 220-230 V, 50-60 Hz • 230-240 V, 50-60 Hz |
| +12V | • Max: 83.3A & Min: 0A (100Vac-127Vac) • Max: 150A & Min: 0A (200Vac-220Vac) • Max: 165A & Min: 0A (220Vac-230Vac) • Max: 166.7A & Min: 0A (230Vac-240Vac) |
| 5V SB | • Max: 1A / Min: 0A |
| Certification | • Titanium Level |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F618R2-RC0+
|
8 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F618R2-RC0+ | • SuperServer F618R2-RC0+ (Black) |
| Motherboard | |
| Super X10DRFR-N | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SAS | • LSI 3008 SAS3 (12Gbps) controller |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350-AM2 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SAS | • 6x SAS3 (12Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port / 1 Header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F418BC-R2K04B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 150 lbs (68.04 kg) • Gross Weight: 200 lbs (90.71 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1x PCI-E 3.0 x16 Low-profile • 1x PCI-E 3.0 x8 (Micro LP) • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • 6x 2.5″ Hot-swap SAS/SATA drives • Optional NVMe support |
| Backplane | |
| • 1x SAS/SATA backplane |
|
| System Cooling | |
| Fans | • 3x 4cm 14k RPM middle fans |
| Power Supply | |
| • 2000W Titanium Level (96%) High-efficiency Redundant Power Supplies |
|
| Total Output Power | • 1000W/1800W/1980W/2000W |
| AC Input | • 100-127 V, 50-60 Hz • 200-220 V, 50-60 Hz • 220-230 V, 50-60 Hz • 230-240 V, 50-60 Hz |
| +12V | • Max: 83.3A & Min: 0A (100Vac-127Vac) • Max: 150A & Min: 0A (200Vac-220Vac) • Max: 165A & Min: 0A (220Vac-230Vac) • Max: 166.7A & Min: 0A (230Vac-240Vac) |
| 5V SB | • Max: 1A / Min: 0A |
| Certification | • Titanium Level |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F618R2-RC0PT+
|
8 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F618R2-RC0PT+ | • SuperServer F618R2-RC0PT+ (Black) |
| Motherboard | |
| Super X10DRFR-NT | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SAS | • LSI 3008 SAS3 (12Gbps) controller |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350-AM2 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SAS | • 6x SAS3 (12Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port / 1 Header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F418BC-R2K04B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 150 lbs (68.04 kg) • Gross Weight: 200 lbs (90.71 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1x PCI-E 3.0 x16 Low-profile • 1x PCI-E 3.0 x8 (Micro LP) • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • 6x 2.5″ Hot-swap SAS/SATA drives • Optional NVMe support |
| Backplane | |
| • 1x SAS/SATA backplane |
|
| System Cooling | |
| Fans | • 3x 4cm 14k RPM middle fans |
| Power Supply | |
| • 2000W Titanium Level (96%) High-efficiency Redundant Power Supplies |
|
| Total Output Power | • 1000W/1800W/1980W/2000W |
| AC Input | • 100-127 V, 50-60 Hz • 200-220 V, 50-60 Hz • 220-230 V, 50-60 Hz • 230-240 V, 50-60 Hz |
| +12V | • Max: 83.3A & Min: 0A (100Vac-127Vac) • Max: 150A & Min: 0A (200Vac-220Vac) • Max: 165A & Min: 0A (220Vac-230Vac) • Max: 166.7A & Min: 0A (230Vac-240Vac) |
| 5V SB | • Max: 1A / Min: 0A |
| Certification | • Titanium Level |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F628R3-RTBN+
 |
8 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F628R3-RTBN+ | • SuperServer F628R3-RTBN+ (Black) |
| Motherboard | |
| Super X10DRFR-N | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350-AM2 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 8x SATA3 (6Gbps) ports • 2x SATA3 powered ports that support SATA DOM |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F424AS-R1K28B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 105 lbs (47.63 kg) • Gross Weight: 150 lbs (68.04 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1 PCI-E 3.0 x16 (LP) + 1 Micro LP • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • 8x 3.5″ Hot-swap HDD trays |
| Backplane | |
| • 1x SAS/SATA backplane • 1x SAS/SATA/NVMe hybrid (2 slots) |
|
| System Cooling | |
| Fans | • 2x 8cm 11k RPM middle fans |
| Power Supply | |
| • 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
|
| AC Input | • 1000W Output @ 100-140V, 8-12A, 50-60Hz • 1280W Output @ 180-240V, 6-8A, 50-60Hz |
| DC Output | • 1000W: +12V/83A; +5Vsb/4A • 1280W: +12V/106.7A, +5Vsb/4A |
| Certification | • Platinum Certified   |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F628R3-RTBPTN+
|
8 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F628R3-RTBPTN+ | • SuperServer F628R3-RTBPTN+ (Black) |
| Motherboard | |
| Super X10DRFR-NT | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® X540 Dual Port 10GBase-T • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 8x SATA3 (6Gbps) ports • 2x SATA3 powered ports that support SATA DOM |
| NVMe | 2x Internal NVMe ports (4x PCI-E 3.0) |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F424AS-R1K28B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 105 lbs (47.63 kg) • Gross Weight: 150 lbs (68.04 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1 PCI-E 3.0 x16 (LP) + 1 Micro LP • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • (6+2) 3.5″ Hot-swap SATA3 HDD trays |
| Backplane | |
| • 1x SAS/SATA backplane • 1x SAS/SATA/NVMe hybrid (2 slots) |
|
| System Cooling | |
| Fans | • 2x 8cm 11k RPM middle fans |
| Power Supply | |
| • 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
|
| AC Input | • 1000W Output @ 100-140V, 8-12A, 50-60Hz • 1280W Output @ 180-240V, 6-8A, 50-60Hz |
| DC Output | • 1000W: +12V/83A; +5Vsb/4A • 1280W: +12V/106.7A, +5Vsb/4A |
| Certification | • Platinum Certified |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F628R3-RC1B+
|
8 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F628R3-RC1B+ | • SuperServer F628R3-RC1B+ (Black) |
| Motherboard | |
| Super X10DRFR-N | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® X540 Dual Port 10GBase-T • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SAS | • 8x SAS3 (12Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F424AS-R1K28B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 105 lbs (47.63 kg) • Gross Weight: 150 lbs (68.04 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1 PCI-E 3.0 x16 (LP) + 1 Micro LP • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • (6+2) 3.5″ Hot-swap SAS3 HDD trays • 8x SAS3 or 6x SAS3 + 2x NVMe (optional) |
| Backplane | |
| • 1x SAS/SATA backplane • 1x SAS/SATA/NVMe hybrid (2 slots) |
|
| System Cooling | |
| Fans | • 2x 8cm 11k RPM middle fans |
| Power Supply | |
| • 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
|
| AC Input | • 1000W Output @ 100-140V, 8-12A, 50-60Hz • 1280W Output @ 180-240V, 6-8A, 50-60Hz |
| DC Output | • 1000W: +12V/83A; +5Vsb/4A • 1280W: +12V/106.7A, +5Vsb/4A |
| Certification | • Platinum Certified |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F618R2-FTPT+
 |
8 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F618R2-FTPT+ | • SuperServer F618R2-FTPT+ (Black) |
| Motherboard | |
| Super X10DRFF-ITG | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® X540 Dual Port 10GBase-T • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 10x SATA3 (6Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F418IF2-R2K04B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 150 lbs (68.04 kg) • Gross Weight: 200 lbs (90.72 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1x PCI-E 3.0 x8, 1x PCI-E 2.0 x4, or 2x PCI-E 3.0 x8 (optional) |
| Drive Bays (per node) |
|
| Fixed | • 4x 2.5″ fixed drives |
| System Cooling | |
| Fans | • 8x 8cm 9.5k RPM Rear fans |
| Power Supply | |
| • 2000W Titanium Level (96%) High-efficiency Redundant Power Supplies |
|
| Total Output Power | • 1000W/1800W/1980W/2000W |
| AC Input | • 100-127 V, 50-60 Hz • 200-220 V, 50-60 Hz • 220-230 V, 50-60 Hz • 230-240 V, 50-60 Hz |
| +12V | • Max: 83.3A & Min: 0A (100Vac-127Vac) • Max: 150A & Min: 0A (200Vac-220Vac) • Max: 165A & Min: 0A (220Vac-230Vac) • Max: 166.7A & Min: 0A (230Vac-240Vac) |
| 5V SB | • Max: 1A / Min: 0A |
| Certification | • Titanium Level |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F618R3-FTPT+
|
8 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F618R3-FTPT+ | • SuperServer F618R3-FTPT+ (Black) |
| Motherboard | |
| Super X10DRFF-ITG | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® X540 Dual Port 10GBase-T • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 10x SATA3 (6Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F418IF2-R2K04B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 150 lbs (68.04 kg) • Gross Weight: 200 lbs (90.72 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1x PCI-E 3.0 x8, 1x PCI-E 2.0 x4, or 2x PCI-E 3.0 x8 (optional) |
| Drive Bays (per node) |
|
| Fixed | • 2x 2.5″ fixed drives |
| System Cooling | |
| Fans | • 8x 8cm 9.5k RPM Rear fans |
| Power Supply | |
| • 2000W Titanium Level (96%) High-efficiency Redundant Power Supplies |
|
| Total Output Power | • 1000W/1800W/1980W/2000W |
| AC Input | • 100-127 V, 50-60 Hz • 200-220 V, 50-60 Hz • 220-230 V, 50-60 Hz • 230-240 V, 50-60 Hz |
| +12V | • Max: 83.3A & Min: 0A (100Vac-127Vac) • Max: 150A & Min: 0A (200Vac-220Vac) • Max: 165A & Min: 0A (220Vac-230Vac) • Max: 166.7A & Min: 0A (230Vac-240Vac) |
| 5V SB | • Max: 1A / Min: 0A |
| Certification | • Titanium Level |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F628R3-RTB+
 |
4 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F628R3-RTB+ | • SuperServer F628R3-RTB+ (Black) |
| Motherboard | |
| Super X10DRFR | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350-AM2 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 8x SATA3 (6Gbps) ports • 2x SATA3 powered ports that support SATA DOM |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F424AS-R1K28B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 105 lbs (47.63 kg) • Gross Weight: 150 lbs (68.04 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1 PCI-E 3.0 x16 (LP) + 1 Micro LP • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • (6+2) 3.5″ Hot-swap SATA3 HDD trays |
| Backplane |
|
| • 1x SAS/SATA backplane |
|
| System Cooling | |
| Fans | • 2x 8cm 11k RPM middle fans |
| Power Supply | |
| • 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
|
| AC Input | • 1000W Output @ 100-140V, 8-12A, 50-60Hz • 1280W Output @ 180-240V, 6-8A, 50-60Hz |
| DC Output | • 1000W: +12V/83A; +5Vsb/4A • 1280W: +12V/106.7A, +5Vsb/4A |
| Certification | • Platinum Certified |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 5°C to 40°C (41°F to 104°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F628R3-RTBPT+
|
4 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F628R3-RTBPT+ | • SuperServer F628R3-RTBPT+ (Black) |
| Motherboard | |
| Super X10DRFR-NT | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® X540 Dual Port 10GBase-T • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 8x SATA3 (6Gbps) ports • 2x SATA3 powered ports that support SATA DOM |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F424AS-R1K28B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 105 lbs (47.63 kg) • Gross Weight: 150 lbs (68.04 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1 PCI-E 3.0 x16 (LP) + 1 Micro LP • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • (6+2) 3.5″ Hot-swap SATA3 HDD trays |
| Backplane |
|
| • 1x SAS/SATA backplane |
|
| System Cooling | |
| Fans | • 2x 8cm 11k RPM middle fans |
| Power Supply | |
| • 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
|
| AC Input | • 1000W Output @ 100-140V, 8-12A, 50-60Hz • 1280W Output @ 180-240V, 6-8A, 50-60Hz |
| DC Output | • 1000W: +12V/83A; +5Vsb/4A • 1280W: +12V/106.7A, +5Vsb/4A |
| Certification | • Platinum Certified |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 5°C to 40°C (41°F to 104°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F628R3-R72B+
|
4 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F628R3-R72B+ | • SuperServer F628R3-R72B+ (Black) |
| Motherboard | |
| Super X10DRFR | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350-AM2 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 8x SATA3 (6Gbps) ports • 2x SATA3 powered ports that support SATA DOM |
| SAS | • 8x SAS2 (6Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F424AS-R1K28B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 105 lbs (47.63 kg) • Gross Weight: 150 lbs (68.04 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1 PCI-E 3.0 x16 (LP) + 1 Micro LP • MicroLP Adapter Matrix (Networking options) |
| Drive Bays (per node) |
|
| Hot-swap | • (6+2) 3.5″ Hot-swap SATA3 HDD trays |
| Backplane |
|
| • 1x SAS/SATA backplane |
|
| System Cooling | |
| Fans | • 2x 8cm 11k RPM middle fans |
| Power Supply | |
| • 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
|
| AC Input | • 1000W Output @ 100-140V, 8-12A, 50-60Hz • 1280W Output @ 180-240V, 6-8A, 50-60Hz |
| DC Output | • 1000W: +12V/83A; +5Vsb/4A • 1280W: +12V/106.7A, +5Vsb/4A |
| Certification | • Platinum Certified |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 5°C to 40°C (41°F to 104°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F618R2-FT
 |
8 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F618R2-FT | • SuperServer F618R2-FT (Black) |
| Motherboard | |
| Super X10DRFF | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 8x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Dual Intel® i210 Single Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 2x SATA3 (6Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F418IL-R1K62B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 150 lbs (68.04 kg) • Gross Weight: 200 lbs (90.71 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1x PCI-E 3.0 x16 Low-profile via riser card |
| Drive Bays (per node) |
|
| Hot-swap | • 2x 2.5″ Hot-swap SATA HDD trays |
| System Cooling | |
| Fans | • 2x 8cm 11k RPM middle fans |
| Power Supply | |
| • 1620W high-efficiency redundant power supply w/ PMBus |
|
| AC Input | • 1000W Output @ 100-120V, 12-10A, 50-60Hz • 1200W Output @ 120-140V, 12-10A, 50-60Hz • 1620W Output @ 180-240V, 10.5-8A, 50-60Hz |
| DC Output | • 1000W: +12V/84A; +5Vsb/4A • 1200W: +12V/100A; +5Vsb/4A • 1620W: +12V/150A; +5Vsb/4A |
| Certification | • Platinum Certified |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F618R3-FT
 |
8 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F618R3-FT | • SuperServer F618R3-FT (Black) |
| Motherboard | |
| Super X10DRFF | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 8x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Dual Intel® i210 Single Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 2x SATA3 (6Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F418IL-R1K62B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 150 lbs (68.04 kg) • Gross Weight: 200 lbs (90.71 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 1x PCI-E 3.0 x16 Low-profile via riser card |
| Drive Bays (per node) |
|
| Fixed | • 2x 3.5″ Fixed SATA HDD trays |
| System Cooling | |
| Fans | • 8x 8cm 9.5K RPM Rear Fans |
| Power Supply | |
| • 1620W high-efficiency redundant power supply w/ PMBus |
|
| AC Input | • 1000W Output @ 100-120V, 12-10A, 50-60Hz • 1200W Output @ 120-140V, 12-10A, 50-60Hz • 1620W Output @ 180-240V, 10.5-8A, 50-60Hz |
| DC Output | • 1000W: +12V/84A; +5Vsb/4A • 1200W: +12V/100A; +5Vsb/4A • 1620W: +12V/150A; +5Vsb/4A |
| Certification | • Platinum Certified |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer F628R2-FT+
 |
4 Hot-plug System Nodes in 4U
|
| Product SKUs | |
| SYS-F628R2-FT+ | • SuperServer F628R2-FT+ (Black) |
| Motherboard | |
| Super X10DRFF-IG | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • K1/K10/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 6x SATA3 (6Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 port |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Chassis | |
| Form Factor | • 4U Rackmount |
| Model | • CSE-F424BF-R1K28B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 6.96″ (177mm) |
| Depth | • 29″ (737mm) |
| Package | • 28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
| Weight | • Net Weight: 105 lbs (47.63 kg) • Gross Weight: 150 lbs (68.04 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots (per node) | |
| PCI-Express | • 2x PCI-E 3.0 x8 (Low Profile) slots |
| Drive Bays (per node) |
|
| Fixed | • 6x 2.5″ Hot-swap SATA3 HDD trays |
| Backplane |
|
| • 1x SATA3 backplane |
|
| System Cooling | |
| Fans | • 8x 8cm 9.5K heavy duty, hot swappable fans with air shroud and PWM fan speed control |
| Power Supply | |
| • 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
|
| AC Input | • 1000W Output @ 100-140V, 8-12A, 50-60Hz • 1280W Output @ 180-240V, 6-8A, 50-60Hz |
| DC Output | • 1000W: +12V/83A; +5Vsb/4A • 1280W: +12V/106.7A, +5Vsb/4A |
| Certification | • Platinum Certified |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
E5-2600 v3 + C612 based SuperServer / Socket R3 – LGA 2011 / DP & UP Xeon
4U Xeon® E5-2600 v3 Family
Designed for optimal performance, the dual-processor SuperServer 7048 series and the uni-processor SuperServer 5048 series support the QPI (9.6 GT/s) format Xeon® E5-2600 v3 Family processors in a high-density 4U form-factor. The 7048 SuperServer have excellent expansion capability and feature set while 5048 SuperServer is optimized as storage powerhouse.
SuperServer 6048R-TXR
 |
|
| Product SKUs | |
| SYS-6048R-TXR | • SuperServer 6048R-TXR (Black) |
| Motherboard | |
| Super X10DRX | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 10x SATA3 (6Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 via header, 1 Type A) • 4x USB 2.0 ports (2 rear, 2 via headers) |
| Video | • 1x VGA port |
| Serial Port / Header | • 2x COM ports (1 rear, 1 Header) |
| DOM | • 2x SuperDOM (Disk on Module) ports |
| TPM | • 1x TPM 1.2 20-pin Header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Chassis | |
| Form Factor | • 4U Rackmountable / Tower • Optional Rackmount Kit |
| Model | • CSE-842XTQ-R606B |
| Dimensions and Weight | |
| Width | • 7.0″ (178mm) |
| Height | • 17.2″ (437mm) |
| Depth | • 20.68″ (525mm) |
| Gross Weight | • 49 lbs (22.2kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED • Power fail LED |
| Expansion Slots |
|
| PCI-Express | • 10x PCI-E 3.0 x8 slots • 1x PCI-E 2.0 x4 (in x8) slot(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) |
| Drive Bays |
|
| Hot-swap | • 5x 3.5″ Hot-swap Drive Trays |
| 90° Rotatable | • 3x 5.25″ Peripheral Drive Trays |
| Peripheral Bay |
|
| DVD-ROM | • 1x slim DVD-ROM drive (optional) |
| SAS / SATA Backplane |
|
| • SAS / SATA Hard Drive Backplane w/AMI MG9072 |
|
| System Cooling | |
| Fans | • 1x 92x38mm 4-pin PWM front intake fan • 2x 80x38mm 4-pin PWM rear exhaust fans |
| Power Supply | |
| • 600W Redundant High-Efficiency Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFC |
|
| AC Input | • 100-240V, 50-60Hz, 7.5-3.0A |
| DC Output | • +5V standby: 3A • +12V: 50A |
| Certification | • Platinum Certified |
| PC Health Monitoring | |
| CPU | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 6-Phase-switching voltage regulator |
| FAN | • Total of eight fan headers supporting up to 8 fans • 8x fans with tachometer status monitoring • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x fan connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • Chassis intrusion detection • Chassis intrusion header |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 7048R-TR
 |
|
| Product SKUs | |
| SYS-7048R-TR | • SuperServer 7048R-TR (Black) |
| Motherboard | |
| Super X10DRi | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 8x SATA3 (6Gbps) ports • 2x SATA3 powered ports that support SATA DOM |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • Rear USB: 2x USB 3.0 + 2x USB 2.0 • Front USB: 2x USB 2.0 • USB Header: 2x 3.0, 2x 2.0, 1x Type A |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x COM/Serial |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI, SPM, SUM • IPMI 2.0 • Intel Node Manager |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmountable / Tower • Optional Rackmount Kit |
| Model | • CSE-745TQ-R920B |
| Dimensions and Weight | |
| Width | • 7.0″ (178mm) |
| Height | • 17.2″ (437mm) |
| Depth | • 25.5″ (648mm) |
| Gross Weight | • Net Weight: 56 lbs (25.6 kg) • Gross Weight: 73.5 lbs (33.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED • Power Fail LED |
| Ports | • 2x USB Ports |
| Expansion Slots |
|
| PCI-Express | • 3x PCI-E 3.0 x16 (Full-height, Full-length) • 3x PCI-E 3.0 x8 (Full-height, Full-length) |
| Drive Bays |
|
| Hot-swap | • 8x 3.5″ Hot-swap SAS/SATA Drive Trays |
| Peripheral Bay(s) [90o Rotatable] | • 2x 5.25″ Peripheral Drive Bays • 1x 5.25″ Bay that fits 3.5″ bay devices |
| SAS / SATA Backplane |
|
| • SAS / SATA Hard Drive Backplane w/AMI MG9072 |
|
| System Cooling | |
| Fans | • 3x 8cm hot-swap redundant PWM cooling fans • 2x 8cm hot-swap exhaust Fans and air shroud |
| Power Supply | |
| • 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
|
| AC Input | • 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | • 4 Amp @ +5V standby • 75 Amp @ +12V |
| Certification | • Platinum Certified |
| PC Health Monitoring | |
| CPU | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 6-Phase-switching voltage regulator |
| FAN | • Total of eight fan headers supporting up to 8 fans • 8x fans with tachometer status monitoring • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x fan connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • Chassis intrusion detection • Chassis intrusion header |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 7048R-C1R
 |
|
| Product SKUs | |
| SYS-7048R-C1R | • SuperServer 7048R-C1R (Black) |
| Motherboard | |
| Super X10DRH-C | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 8x SATA3 (6Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports (2 rear) • 4x USB 2.0 ports (2 rear, 2 front) • 1x USB Type A |
| Video | • 1x VGA port |
| Serial Port / Header | • 1x COM/Serial |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • DMI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI, SPM, SUM • IPMI 2.0 • Intel Node Manager |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmountable / Tower • Optional Rackmount Kit |
| Model | • CSE-745TQ-R920B |
| Dimensions and Weight | |
| Width | • 7.0″ (178mm) |
| Height | • 17.2″ (437mm) |
| Depth | • 25.5″ (648mm) |
| Package | • 24″ (H) x 14″ (W) x 26.5″ (D) |
| Gross Weight | • Net Weight: 56.5 lbs (25.6 kg) • Gross Weight: 74 lbs (33.57 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED • Power Fail LED |
| Ports | • 2x USB Ports |
| Expansion Slots |
|
| PCI-Express | • 1x PCI-E 3.0 x16 (Full-height, Full-length) • 6x PCI-E 3.0 x8 (Full-height, Full-length) |
| Drive Bays |
|
| Hot-swap | • 8x 3.5″ Hot-swap SATA3 drive trays • 8x 2.5″ Hot-swap SAS3 drives in mobile rack |
| Peripheral Bay(s) [90o Rotatable] | • 1x 5.25″ drive bay (optional devices) |
| SAS / SATA Backplane |
|
| • SAS via backplane (BPN-SAS3-I28A) in Mobile rack • SATA via chassis HDD Backplane CSE-SAS-743TQ-O-P |
|
| System Cooling | |
| Fans | • 3x 8cm Hot-swap redundant PWM Cooling Fans • 2x 8cm Hot-swap Rear Exhaust PWM Fans & air shroud |
| Power Supply | |
| • 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
|
| AC Input | • 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | • 4 Amp @ +5V standby • 75 Amp @ +12V |
| Certification | • Platinum Certified |
| PC Health Monitoring | |
| CPU | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 6-Phase-switching voltage regulator |
| FAN | • Total of eight fan headers supporting up to 8 fans • 8x fans with tachometer status monitoring • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x fan connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • Chassis intrusion detection • Chassis intrusion header |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 4028GR-TR
 |
|
| Product SKUs | |
| SYS-4028GR-TR | • SuperServer 4028GR-TR (Black) |
| Motherboard | |
| Super X10DRG-O+-CPU | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | • M40/K40M/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Dual Gigabit Ethernet Ports with Intel® i350 • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 4x SATA3 (6Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 4x USB 3.0 ports |
| Video | • 1x VGA Connector |
| Serial Port |
• 1x Serial header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • DMI 2.3 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI |
| Management | |
| Software | • SuperDoctor® 5 • Watch Dog • NMI, SPM, SUM • IPMI 2.0 • Intel Node Manager |
| Power Configurations | • ACPI / APM Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 4U Rackmountable Rackmount Kit (MCP-290-00057-0N) |
| Model | • CSE-418GTS-R3200B |
| Dimensions and Weight | |
| Width | • 7.0″ (178mm) |
| Height | • 17.2″ (437mm) |
| Depth | • 29″ (737mm) |
| Gross Weight | • Net Weight: 80 lbs (36.2 kg) • Gross Weight: 135 lbs (61.2 kg) |
| Available Color | • Black |
| Expansion Slots |
|
| PCI-Express | • 8x PCI-E 3.0 x16 (double-width) slots • 2x PCI-E 3.0 x8 (in x16) slots • 1x PCI-E 2.0 x4 (in x16) slot |
| Drive Bays |
|
| Hot-swap | • 24x 2.5″ Hard drive bays |
| SAS / SATA Backplane |
|
| • SAS/SATA HDD Backplane |
|
| System Cooling | |
| Fans | • 8x 92mm RPM Hot-Swappable Cooling Fans |
| Shrouds | • 1x Air Shroud (MCP-310-84806-0B) • 1x Air Shroud (MCP-310-84807-0B) |
| Power Supply | |
| • 1000W/1600W 1U Redundant Power Supply |
|
| AC Input | • 1000W @ 100-127V, 12.9A Max., 50-60Hz • 1600W @ 200-240V, 9.5A Max., 50-60Hz |
| DC Output | • 1000W: +12V/82A; +12Vsb/2A • 1600W: +12V/132A; +12Vsb/2A |
| Certification | • Platinum Certified |
| PC Health Monitoring | |
| CPU | • Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages. • 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V |
| FAN | • 4-pin fan headers with tachometer status monitoring • Low noise fan speed control mode |
| Temperature | • Monitoring for CPU and system environment • Thermal Control for 8x fan connectors |
| Other Features | • Chassis intrusion detection |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperWorkstation 7048A-T
|
|
| Product SKUs | |
| SuperWorkstation | • SYS-7048A-T (Black) |
| Motherboard | |
| Super X10DAi | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Intel® i210 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Audio | • RealTek ALC888 7.1 High Definition Audio with S/PDIF header |
| Input / Output (per node) | |
| SATA | • 10x SATA3 (6Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports |
| USB | • 6x USB 3.0 ports (4 rear + 2 via header) • 5x USB 2.0 ports (2 rear + 2 via header + 1 Type A) |
| Audio | • 7.1 HD Audio with optical S/PDIF |
| DOM | • 1x DOM (Disk on Module) power connector |
| TPM |
• 1x TPM 1.2 20-pin Header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • DMI 2.3 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI |
| Chassis | |
| Form Factor | • 4U Rackmountable / Tower • Optional Rackmount Kit |
| Model | • CSE-743TQ-1200B-SQ |
| Dimensions and Weight | |
| Width | • 7.0″ (178mm) |
| Height | • 17.8″ (452mm) |
| Depth | • 25.5″ (648mm) |
| Gross Weight | • 71 lbs (32.2 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED |
| Ports | • 2x front USB 3.0 Ports |
| Expansion Slots |
|
| PCI-Express | • 3x PCI-E 3.0 x16 slots • 2x PCI-E 3.0 x8 slots • 1x PCI-E 2.0 x4 (in x8) slot supports Thunderbolt 2.0 AIC |
| Drive Bays |
|
| Hot-swap | • 8x 3.5″ Hot-swap SAS/SATA Drive Trays |
| Peripheral Bay(s) [90o Rotatable] | • 3x 5.25″ Drive Bays |
| SAS / SATA Backplane |
|
| • SAS / SATA Hard Drive Backplane w/AMI MG9072 |
|
| System Cooling | |
| Fans | • 2x 2800 RPM Fans • 1x 2700 RPM Fan |
| Power Supply | |
| • 1200W high-efficiency power supply w/ PMBus |
|
| AC Input | • 1000W: 100-114.9 V, 50-60 Hz, 12 Amp • 1200W: 114.9-240 V, 50-60 Hz, 12-8 Amp |
| DC Output | • +3.3V / +5V / +12V / -12V / +5VSB • 20A / 20A / 83A / 0.3A / 3A • 20A / 20A / 99A / 0.3A / 3A |
| Note: | • Max. continuous combined load on +3.3V and +5V output shall not exceed 120W. |
| Certification | • Platinum Certified |
| PC Health Monitoring | |
| CPU | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. • 6-Phase-switching voltage regulator |
| FAN | • Total of three fan headers supporting up to 8 fans • Three 4-pin fan headers • 3x fans with tachometer status monitoring • Support 3-pin fans (w/o speed control) • Low noise fan speed control (4-pin fan only) |
| Temperature | • Monitoring for CPU and chassis environment • Thermal Control for 8x fan connectors • PECI |
| Other Features | • Chassis intrusion detection • Chassis intrusion header |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
GPU SuperWorkstation 7048GR-TR
|
|
| Product SKUs | |
| SYS-7048GR-TR | • SuperServer 7048GR-TR (Black) |
| Motherboard | |
| Super X10DRG-Q | link |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU Support | • K1/K40M/K80 |
| System Memory | |
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Intel® i350 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Video | • ASPEED AST2400 BMC |
| Input / Output (per node) | |
| SATA | • 10x SATA3 (6Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 via header, 1 Type A) • 4x USB 2.0 ports (2 rear, 2 via headers) |
| Audio | • 7.1 HD Audio |
| Video | • 1x VGA port |
| Serial Port / Header |
• 2x COM ports (1 rear, 1 Header) |
| Thunderbolt | • Thunderbolt AOC Header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • DMI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
| Chassis | |
| Form Factor | • 4U Rackmountable / Tower • Optional Rackmount Kit |
| Model | • CSE-747BTQ-R2K04B |
| Dimensions and Weight | |
| Width | • 7.0″ (178mm) |
| Height | • 18.2″ (462mm) |
| Depth | • 26.5″ (673mm) |
| Gross Weight | • Net Weight: 46 lbs (20.9 kg) • Gross Weight: 62 lbs (21.8 kg) |
| Available Color | • Dark Gray |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED |
| Ports | • 2x Front USB 2.0 Ports |
| Expansion Slots |
|
| PCI-Express | • 4x PCI-E 3.0 x16 (double-width) • 2x PCI-E 3.0 x8 (1 in x16 slot) support Thunderbolt 2.0 AOC • 1x PCI-E 2.0 x4 (in x8) |
| Drive Bays |
|
| Hot-swap | • 8x 3.5″ Hot-swap SAS/SATA Drive Trays |
| Peripheral Bay(s) | • 3x 5.25″ drive bays in storage module – rotates 90° for Rackmount • 1x 3.5″ fixed drive bay |
| SAS / SATA Backplane |
|
| • SAS / SATA Hard Drive Backplane with SES2 |
|
| System Cooling | |
| Fans | • 4x 92x38mm 4-pin PWM Middle Cooling Fans • 2x 80x38mm 4-pin PWM Rear Exhaust Fans |
| Heatsink | • 2x Active Heatsink with Optimal Fan Speed Control |
| Power Supply | |
| • 2000W Titanium Level (96%) High-efficiency Redundant Power Supplies |
|
| Total Output Power | • 1000W/1800W/1980W/2000W |
| AC Input | • 100-127 V, 50-60 Hz • 200-220 V, 50-60 Hz • 220-230 V, 50-60 Hz • 230-240 V, 50-60 Hz |
| +12V | • Max: 83.3A & Min: 0A (100Vac-127Vac) • Max: 150A & Min: 0A (200Vac-220Vac) • Max: 165A & Min: 0A (220Vac-230Vac) • Max: 166.7A & Min: 0A (230Vac-240Vac) |
| 5V SB | • Max: 1A / Min: 0A |
| Certification | • Titanium Level |
| PC Health Monitoring | |
| CPU | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. • 6-Phase-switching voltage regulator |
| FAN | • Total of eight fan headers supporting up to 8 fans • 8x fans with tachometer status monitoring • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x fan connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote LED |
| Other Features | • Chassis intrusion detection • Chassis intrusion header |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
You must be logged in to post a comment.