E5-2600 v3 + C612 based SuperServer / Socket R3 – LGA 2011 / DP Xeon
1U Xeon® E5-2600 v3 Family
Supermicro’s New Generation X10 Haswell DP SuperServer® offers numerous advantages over previous generations including the highest levels of performance, efficiency, security and scalability in the industry.
SuperServer 1028U-TN10RT+ (Complete System Only)
 |
|
| Product SKUs | |
| SYS-1028U-TN10RT+ | • SuperServer 1028U-TN10RT+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 2x 10GBase-T ports via AOC-URN6-i2XT • Intel® X540 10GBase-T • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| NVMe/SAS | • 6x NVMe ports (NVMe from CPU 1) • 4x NVMe/SAS3 Hybrid ports (NVMe from CPU 2) |
| LAN | • 2x RJ45 10GBase-T ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UAC2-R1K02 |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.8″ (707mm) |
| Weight | • 48 lbs (21.8 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System UID button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • UID LED |
| Expansion Slots | |
| PCI-Express | • 3x PCI-E 3.0 x8 slots (2x Full-height 10.5″ L; 1x Low-profile) |
| Drive Bays | |
| Hot-swap | • 10x 2.5″ Hot-swap drive bays • 6x NVMe ports (NVMe from CPU 1) • 4x NVMe/SAS3 hybrid ports for optional SAS3/SATA3 (NVMe from CPU 2) |
| System Cooling | |
| Fans | • 8x heavy duty fans with optimal fan speed control |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 1000W Redundant Titanium Level (96%) Single Output Power Supplies |
|
| AC Input | • 100-127 V, 50-60 Hz • 200-240 V, 50-60 Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 83A (200Vac-240Vac) & Min: 0A |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Titanium Level   |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028U-E1CR4+ (Complete System Only)
 |
|
| Product SKUs | |
| SYS-1028U-E1CR4+ | • SuperServer 1028U-E1CR4+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 2x 10GBase-T ports via AOC-URN6-i2XT • Intel® X540 10GBase-T • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SAS | • 10x SAS3 ports support via expander and storage Add-on Cards One of the following storage Add-on cards required:• AOC-S3108-H8iR-16DD (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3) 16HDD• AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)• AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)• AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3) |
| LAN | • 4x RJ45 GbE LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UTS-R751P-T |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.8″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) |
| Drive Bays | |
| Hot-swap | • 10x 2.5″ Hot-swap drives supported via expander |
| System Cooling | |
| Fans | • 5x heavy duty fans with optimal fan speed control • 3x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level   |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028U-E1CRTP+ (Complete System Only)
|
|
| Product SKUs | |
| SYS-1028U-E1CRTP+ | • SuperServer 1028U-E1CRTP+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 2x GbE and 2x SFP+ ports via AOC-URN2-I4GXS • Intel® i350 Gigabit Ethernet Controller • Intel® X710 10G SFP+ • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SAS | • 10x SAS3 ports support via expander and storage Add-on Cards
• One of the following storage Add-on cards required: AOC-S3108-H8iR-16DD (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3) 16HDD AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3) AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3) AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3) |
| LAN | • 2x RJ45 GbE LAN ports • 2x 10G SFP+ ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UTS-R751P-T |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.8″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) |
| Drive Bays | |
| Hot-swap | • 10x 2.5″ Hot-swap drives supported via expander |
| System Cooling | |
| Fans | • 5x heavy duty fans with optimal fan speed control • 3x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028U-TR4+ (Complete System Only)
  |
|
| Product SKUs | |
| SYS-1028U-TR4+ | • SuperServer 1028U-TR4+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 4x 10GBase-T ports via AOC-UR-i4G • Intel® i350 Gigabit Ethernet Controller • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 10x SATA3 (6Gbps) ports |
| SAS | • 8x SAS3 ports support via optional Add-on Card |
| LAN | • 4x RJ45 Gigabit Ethernet ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UAC-R750 |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.8″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) |
| Drive Bays | |
| Hot-swap | • 10x 2.5″ Hot-swap drives supported via expander |
| System Cooling | |
| Fans | • 4x heavy duty fans with optimal fan speed control • 4x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028U-TR4T+ (Complete System Only)
|
|
| Product SKUs | |
| SYS-1028U-TR4T+ | • SuperServer 1028U-TR4T+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 4x 10GBase-T ports via AOC-UR-i4G • Intel® i350 Gigabit Ethernet Controller • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 10x SATA3 (6Gbps) ports |
| SAS | • 8x SAS3 ports support via optional Add-on Card |
| LAN | • 4x RJ45 Gigabit Ethernet ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UAC-R750 |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.8″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) |
| Drive Bays | |
| Hot-swap | • 10x 2.5″ Hot-swap drives supported via expander |
| System Cooling | |
| Fans | • 4x heavy duty fans with optimal fan speed control • 4x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028U-TRT+ (Complete System Only)
 |
|
| Product SKUs | |
| SYS-1028U-TRT+ | • SuperServer 1028U-TRT+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 2x 10GBase-T ports via AOC-UR-i2XT • Intel® X540 10GBase-T • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 10x SATA3 (6Gbps) ports |
| SAS | • 8x SAS3 ports support via optional Add-on Card |
| LAN | • 4x RJ45 Gigabit Ethernet ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UAC-R750 |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.8″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) |
| Drive Bays | |
| Hot-swap | • 10x 2.5″ Hot-swap drives supported via expander |
| System Cooling | |
| Fans | • 4x heavy duty fans with optimal fan speed control • 4x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028U-TNRTP+ (Complete System Only)
 |
|
| Product SKUs | |
| SYS-1028U-TNRTP+ | • SuperServer 1028U-TNRTP+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 2x 10GBase-T ports via AOC-URN6-i2XT • Intel® X540 10GBase-T • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 10x SATA3 (6Gbps) ports |
| SAS | • 8x SAS3 ports support via optional Add-on Card |
| NVMe | • 2x NVMe ports |
| LAN | • 2x 10G SFP+ ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UAC2-R750 |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.82″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) |
| Drive Bays | |
| Hot-swap | • 10x 2.5″ Hot-swap drive bays • Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports • Optional 8x SAS3 ports via AOC |
| System Cooling | |
| Fans | • 5x heavy duty fans with optimal fan speed control • 3x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028U-TNR4T+ (Complete System Only)
 |
|
| Product SKUs | |
| SYS-1028U-TNR4T+ | • SuperServer 1028U-TNR4T+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 4x 10GBase-T ports via AOC-URN2-i4XT • Intel® X540 10GBase-T • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 10x SATA3 (6Gbps) ports |
| SAS | • 8x SAS3 ports support via optional Add-on Card |
| NVMe | • 2x NVMe ports |
| LAN | • 4x RJ45 10GBase-T ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UAC2-R750 |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.82″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) |
| Drive Bays | |
| Hot-swap | • 10x 2.5″ Hot-swap drive bays • Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports • Optional 8x SAS3 ports via AOC |
| System Cooling | |
| Fans | • 5x heavy duty fans with optimal fan speed control • 3x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028U-TNRT+ (Complete System Only)
 |
|
| Product SKUs | |
| SYS-1028U-TNRT+ | • SuperServer 1028U-TNRT+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 2x 10GBase-T ports via AOC-URN2-i4XT • Intel® X540 10GBase-T • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 10x SATA3 (6Gbps) ports |
| SAS | • 8x SAS3 ports support via optional Add-on Card |
| NVMe | • 2x NVMe ports |
| LAN | • 2x RJ45 10GBase-T ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UAC2-R750 |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.82″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) |
| Drive Bays | |
| Hot-swap | • 10x 2.5″ Hot-swap drive bays • Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports • Optional 8x SAS3 ports via AOC |
| System Cooling | |
| Fans | • 5x heavy duty fans with optimal fan speed control • 3x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028UX-CR-LL1 (Complete System Only)
 |
• World Record Benchmark
|
| Product SKUs | |
| SYS-1028UX-CR-LL1 | • SuperServer 1028UX-CR-LL1 (Black) |
| Motherboard | |
| Super X10DRU-XLL | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2643 v3 Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 6 Cores / Up to 20MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| System Memory | |
| Memory Capacity | • 8 X 8GB DDR4 2133MHz (Default) 16x 288-pin DDR4 DIMM slots Up to 1TB ECC LRDIMM, 768GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SAS | • LSI 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SAS | • 8x SAS3 (12Gbps) ports |
| SATA | • 2x SATA3 (6Gbps) ports |
| NVMe | • 2x NVMe ports support via optional Ultra Riser card (AOC-URN2-i2XT) |
| LAN | • 4x RJ45 Gigabit Ethernet ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| Serial Port / Header | • 1x Fast UART 16550 serial • 1x COM port (rear) |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UTS-R750P |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 30.6″ (777mm) |
| Weight | • 48 lbs (21.8 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | Expansion slots via riser card: • 2x PCI-E 3.0 x16, Full-heigh Full-length • 1x PCI-E 3.0 x8, Low-profile • 1x PCI-E 3.0 x8 SAS3 integrated |
| Drive Bays | |
| Hot-swap | • 8x 2.5″ Hot-swap SAS3 drive bays • 2x 2.5″ Hot-swap SATA3 drive bays • Optional NVMe support: 2x NVMe via AOC-URN2-I2XT (w/ 2x 10GBase-T ports) |
| System Cooling | |
| Fans | • 8x heavy duty fans with optimal fan speed control |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. • CPU Core 6-Phase-switching voltage regulator |
| FAN | • Total of ten 4-pin PWM fans • 10x fans with tachometer monitoring • Status monitor for speed control • Status monitor for on/off control • Low noise fan speed control |
| Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 10x Fan Connectors • PSU I2C temperature sensing logic • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Power Fail / Overheat LED • Suspend-state Indicator LED • UID LED |
| Other Features | • SDDC Support |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028UX-CR-LL2 (Complete System Only)
|
• World Record Benchmark
|
| Product SKUs | |
| SYS-1028UX-CR-LL1 | • SuperServer 1028UX-CR-LL2 (Black) |
| Motherboard | |
| Super X10DRU-XLL | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2643 v3 Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 10 Cores / Up to 25MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| System Memory | |
| Memory Capacity | • 8 X 8GB DDR4 2133MHz (Default) 16x 288-pin DDR4 DIMM slots Up to 1TB ECC LRDIMM, 768GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SAS | • LSI 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SAS | • 8x SAS3 (12Gbps) ports |
| SATA | • 2x SATA3 (6Gbps) ports |
| NVMe | • 2x NVMe ports support via optional Ultra Riser card (AOC-URN2-i2XT) |
| LAN | • 4x RJ45 Gigabit Ethernet ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| Serial Port / Header | • 1x Fast UART 16550 serial • 1x COM port (rear) |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UTS-R750P |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 30.6″ (777mm) |
| Weight | • 48 lbs (21.8 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | Expansion slots via riser card: • 2x PCI-E 3.0 x16, Full-heigh Full-length • 1x PCI-E 3.0 x8, Low-profile • 1x PCI-E 3.0 x8 SAS3 integrated |
| Drive Bays | |
| Hot-swap | • 8x 2.5″ Hot-swap SAS3 drive bays • 2x 2.5″ Hot-swap SATA3 drive bays • Optional NVMe support: 2x NVMe via AOC-URN2-I2XT (w/ 2x 10GBase-T ports) |
| System Cooling | |
| Fans | • 8x heavy duty fans with optimal fan speed control |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. • CPU Core 6-Phase-switching voltage regulator |
| FAN | • Total of ten 4-pin PWM fans • 10x fans with tachometer monitoring • Status monitor for speed control • Status monitor for on/off control • Low noise fan speed control |
| Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 10x Fan Connectors • PSU I2C temperature sensing logic • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Power Fail / Overheat LED • Suspend-state Indicator LED • UID LED |
| Other Features | • SDDC Support |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 6018U-TRTP+ (Complete System Only)
 |
|
| Product SKUs | |
| SYS-6018U-TRTP+ | • SuperServer 6018U-TRTP+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 2x 10G SFP+ ports via AOC-URN2-I2XS • Intel® 82599ES 10G SFP+ • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 4x SATA3 (6Gbps) ports |
| LAN | • 2x 10G SFP+ ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| DOM | • 2x SATA DOM (Disk on Module) support with embedded power |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UAC-R750 |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.8″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| Drive Bays | |
| Hot-swap | • 4x 3.5″ Hot-swap drive bays |
| System Cooling | |
| Fans | • 4x heavy duty fans with optimal fan speed control • 4x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 6018U-TR4+ (Complete System Only)
 |
|
| Product SKUs | |
| SYS-6018U-TR4+ | • SuperServer 6018U-TR4+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 2x 10G SFP+ ports via AOC-URN2-I2XS • Intel® 82599ES 10G SFP+ • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 4x SATA3 (6Gbps) ports |
| LAN | • 2x 10G SFP+ ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| DOM | • 2x SATA DOM (Disk on Module) support with embedded power |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UAC-R750 |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.8″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| Drive Bays | |
| Hot-swap | • 4x 3.5″ Hot-swap drive bays |
| System Cooling | |
| Fans | • 4x heavy duty fans with optimal fan speed control • 4x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 6018U-TR4T+ (Complete System Only)
|
|
| Product SKUs | |
| SYS-6018U-TR4T+ | • SuperServer 6018U-TR4T+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 4x 10GBase-T ports via AOC-UR-i4XT • Intel® X540 10GBase-T • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 4x SATA3 (6Gbps) ports |
| LAN | • 2x 10G SFP+ ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| DOM | • 2x SATA DOM (Disk on Module) support with embedded power |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UAC-R750 |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.8″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| Drive Bays | |
| Hot-swap | • 4x 3.5″ Hot-swap drive bays |
| System Cooling | |
| Fans | • 4x heavy duty fans with optimal fan speed control • 4x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 6018U-TRT+ (Complete System Only)
 |
|
| Product SKUs | |
| SYS-6018U-TRT+ | • SuperServer 6018U-TRT+ (Black) |
| Motherboard | |
| Super X10DRU-i+ | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 1.5TB ECC LRDIMM, RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • 2x 10GBase-T ports via AOC-UR-i4XT • Intel® X540 10GBase-T • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 4x SATA3 (6Gbps) ports |
| LAN | • 2x 10G SFP+ ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port | • 1x Serial header |
| DOM | • 2x SATA DOM (Disk on Module) support with embedded power |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • SuperDoctor® 5 • Intel® Node Manager 3.0 • Watch Dog • NMI • SMCBU and SMM • Optional IPMI 1.5 / 2.0 |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-119UAC-R750 |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 27.8″ (707mm) |
| Weight | • Net Weight: 26 lbs (11.8 kg) • Gross Weight: 41 lbs (18.6 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / • UID LED |
| Expansion Slots | |
| PCI-Express | • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L) • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| Drive Bays | |
| Hot-swap | • 4x 3.5″ Hot-swap drive bays |
| System Cooling | |
| Fans | • 4x heavy duty fans with optimal fan speed control • 4x additional fans optional |
| Air Shroud | • 1x Air Shroud |
| Power Supply | |
| • 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
|
| AC Input | • 100-127Vac, 50-60Hz • 200-240Vac, 50-60Hz |
| +12V | • Max: 62.5A & Min: 0A (100Vac-127Vac) • Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12V SB | • Max: 2.1A • Min: 0A |
| Certification | • Platinum Level |
| PC Health Monitoring | |
| Voltage | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. • 5+1 Phase-switching voltage regulator |
| FAN | • 8x 4-pin fan headers • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Support to monitor Supermicro AOC temperatures from IPMI or SD 5 • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Memory DIMM ECC error LEDs • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote UID |
| Other Features | • 4x 8-pin GPU power connectors • Chassis intrusion detection • Chassis intrusion header • SDDC Support • RoHS |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028TR-T
 |
Two systems (nodes) in a 1U form factor. Each node supports the following:
|
| Product SKUs | |
| SYS-1028TR-T | • SuperServer 1028TR-T (Black) |
| Motherboard | |
| Super X10DRT-L | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 8x 288-pin DDR4 DIMM slots • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Intel® i350 Dual Port Gigabit Ethernet • Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Video | • ASPEED AST2400 BMC |
| Input / Output | |
| Serial ATA | • 10x SATA3 (6Gbps) ports |
| LAN | • 2x 10G SFP+ ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 2.0 ports (rear) |
| Video | • 1x VGA Connector |
| Serial Port / Header | • 1x COM port (1 header) |
| DOM | • 2x SuperDOM (Disk on Module) ports |
| Management | |
| Software | • Intel® Node Manager • IPMI 2.0 • NMI • SuperDoctor® 5 • Watch Dog |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Twin |
| Model | • CSE-809BTQ-1K03B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 1.7″ (43mm) |
| Depth | • 27.75″ (705mm) |
| Gross Weight | • 43 lbs (19.5kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button • UID button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED |
| Expansion Slots | |
| PCI-Express | • 1x PCI-E 3.0 x16 (in x16) slot |
| Drive Bays | |
| Hot-swap | • 4x 2.5″ Hot-swap HDD trays |
| System Cooling | |
| Fans | • 3x 40x56mm counter-rotation PWM fan |
| Power Supply | |
| • 1000W Titanium Level (96%) High-efficiency AC-DC power supply with PMBus and I2C |
|
| AC Input | • 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | • 4 Amp @ +5V standby • 75 Amp @ +12V |
| Certification | • Titanium Level Certified |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • PCI 2.3 • ACPI 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028TR-TF
|
Two systems (nodes) in a 1U form factor. Each node supports the following:
|
| Product SKUs | |
| SYS-1028TR-TF | • SuperServer 1028TR-TF (Black) |
| Motherboard | |
| Super X10DRT-LIBF | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 8x 288-pin DDR4 DIMM slots • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Intel® i350 Dual Port Gigabit Ethernet • Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Video | • ASPEED AST2400 BMC |
| Input / Output | |
| Serial ATA | • 10x SATA3 (6Gbps) ports |
| LAN | • 2x 10G SFP+ ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 2.0 ports (rear) |
| Video | • 1x VGA Connector |
| Serial Port / Header | • 1x COM port (1 header) |
| DOM | • 2x SuperDOM (Disk on Module) ports |
| Management | |
| Software | • Intel® Node Manager • IPMI 2.0 • NMI • SuperDoctor® 5 • Watch Dog |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Twin |
| Model | • CSE-809BTQ-1K03B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 1.7″ (43mm) |
| Depth | • 27.75″ (705mm) |
| Gross Weight | • 43 lbs (19.5kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button • UID button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED |
| Expansion Slots | |
| PCI-Express | • 1x PCI-E 3.0 x16 (in x16) slot |
| Drive Bays | |
| Hot-swap | • 4x 2.5″ Hot-swap HDD trays |
| System Cooling | |
| Fans | • 3x 40x56mm counter-rotation PWM fan |
| Power Supply | |
| • 1000W Titanium Level (96%) High-efficiency AC-DC power supply with PMBus and I2C |
|
| AC Input | • 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | • 4 Amp @ +5V standby • 75 Amp @ +12V |
| Certification | • Titanium Level Certified |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • PCI 2.3 • ACPI 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 6018TR-T
 |
Two systems (nodes) in a 1U form factor. Each node supports the following:
|
| Product SKUs | |
| SYS-6018TR-T | • SuperServer 1028TR-TF (Black) |
| Motherboard | |
| Super X10DRT-L | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 8x 288-pin DDR4 DIMM slots • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Intel® i350 Dual Port Gigabit Ethernet • Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Video | • ASPEED AST2400 BMC |
| Input / Output | |
| Serial ATA | • 10x SATA3 (6Gbps) ports |
| LAN | • 2x 10G SFP+ ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 2.0 ports (rear) |
| Video | • 1x VGA Connector |
| Serial Port / Header | • 1x COM port (1 header) |
| DOM | • 2x SuperDOM (Disk on Module) ports |
| Management | |
| Software | • Intel® Node Manager • IPMI 2.0 • NMI • SuperDoctor® 5 • Watch Dog |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Twin |
| Model | • CSE-808TS-1K03B |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 1.75″ (44.45mm) |
| Depth | • 27.75″ (705mm) |
| Gross Weight | • 43 lbs (19.5kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button • UID button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED |
| Expansion Slots | |
| PCI-Express | • 1x PCI-E 3.0 x16 (in x16) slot |
| Drive Bays | |
| Hot-swap | • 2x 3.5″ Hot-swap drive bays |
| System Cooling | |
| Fans | • 3x 40x56mm counter-rotation PWM fan |
| Power Supply | |
| • 1000W Titanium Level (96%) High-efficiency AC-DC power supply with PMBus and I2C |
|
| AC Input | • 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | • 4 Amp @ +5V standby • 75 Amp @ +12V |
| Certification | • Titanium Level Certified |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • PCI 2.3 • ACPI 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028R-MCTR
 |
|
| Product SKUs | |
| SYS-1028R-MCTR | • SuperServer 1028R-MCTR (Black) |
| Motherboard | |
| Super X10DRL-CT | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 8x 288-pin DDR4 DIMM slots • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SAS | • SAS3 (12Gbps) via LSI 3108 • RAID 0, 1, 5, 6, 10, 50, 60 support • 2GB DDR3 Cache |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Intel® X540 10GBase-T controller • Intel® i210 Gigabit Ethernet controller • Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Video | • ASPEED AST2400 BMC |
| Input / Output | |
| SAS | • 8x SAS3 (12Gbps) ports |
| SATA | • 6x SATA3 (6Gbps) ports • I-SATA 4 & I-SATA 5 support SATA DOM |
| LAN | • 2x RJ45 10GBase-T LAN ports • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 4x USB 3.0 ports (2 rear, 2 headers) • 3x USB 2.0 ports (2 headers, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port / Header | • 1x COM port (1 header) |
| DOM | • 2x SuperDOM (Disk on Module) ports |
| Management | |
| Software | • IPMI 2.0 • Intel® Node Manager 3.0 • SuperDoctor® 5 • SSM • SPM • SUM • Watch Dog |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-113MFAC2-R606CB |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 1.7″ (43mm) |
| Depth | • 19.98″ (508mm) |
| Package | • 24″ (W) x 8.3″ (H) x 30″ (L) |
| Gross Weight | • 40 lbs (18.15 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button • UID button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED |
| Expansion Slots | |
| PCI-Express | • 1x PCI-E 3.0 x16 (in x16) slot |
| Drive Bays | |
| Hot-swap | • 8x 2.5″ Hot-swap SAS3/SATA3 Drive Bays |
| Peripheral Drives | |
| DVD-ROM | • 1x Slim DVD-ROM drive (optional) |
| Backplane | |
| • SAS3/SATA3 Backplane • Optional 2x 2.5″ NVMe drives |
|
| System Cooling | |
| Fans | • 4x 4cm fans with optimal fan speed control |
| Power Supply | |
| • 600W Redundant High-Efficiency Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFC |
|
| AC Input | • 100-240V, 50-60Hz, 7.5-3.0A |
| DC Output | • +5V standby: 3A • +12V: 50A |
| Certification | • Platinum Certified |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • PCI 2.3 • ACPI 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 1028R-MCT
 |
|
| Product SKUs | |
| SYS-1028R-MCT | • SuperServer 1028R-MCT (Black) |
| Motherboard | |
| Super X10DRL-CT | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 8x 288-pin DDR4 DIMM slots • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SAS | • SAS3 (12Gbps) via LSI 3108 • RAID 0, 1, 5, 6, 10, 50, 60 support • 2GB DDR3 Cache |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Intel® X540 10GBase-T controller • Intel® i210 Gigabit Ethernet controller • Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Video | • ASPEED AST2400 BMC |
| Input / Output | |
| SAS | • 8x SAS3 (12Gbps) ports |
| SATA | • 6x SATA3 (6Gbps) ports • I-SATA 4 & I-SATA 5 support SATA DOM |
| LAN | • 2x RJ45 10GBase-T LAN ports • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 4x USB 3.0 ports (2 rear, 2 headers) • 3x USB 2.0 ports (2 headers, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port / Header | • 1x COM port (1 header) |
| DOM | • 2x SuperDOM (Disk on Module) ports |
| Management | |
| Software | • IPMI 2.0 • Intel® Node Manager 3.0 • SuperDoctor® 5 • SSM • SPM • SUM • Watch Dog |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | • CSE-113MFAC2-605CB |
| Dimensions and Weight | |
| Width | • 17.2″ (437mm) |
| Height | • 1.7″ (43mm) |
| Depth | • 19.98″ (508mm) |
| Package | • 24″ (W) x 8.3″ (H) x 30″ (L) |
| Gross Weight | • 38 lbs (18.15 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button • UID button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED |
| Expansion Slots | |
| PCI-Express | • 1x PCI-E 3.0 x16 (in x16) slot |
| Drive Bays | |
| Hot-swap | • 8x 2.5″ Hot-swap SAS3/SATA3 Drive Bays |
| Peripheral Drives | |
| DVD-ROM | • 1x Slim DVD-ROM drive (optional) |
| Backplane | |
| • SAS3/SATA3 Backplane • Optional 2x 2.5″ NVMe drives |
|
| System Cooling | |
| Fans | • 4x 4cm fans with optimal fan speed control |
| Power Supply | |
| • 600W Redundant High-Efficiency Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFC |
|
| AC Input | • 100-240V, 50-60Hz, 7.5-3.0A |
| DC Output | • +5V standby: 3A • +12V: 50A |
| Certification | • Platinum Certified |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • PCI 2.3 • ACPI 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 6018R-MT / BULK
 |
*Note: SYS-6018R-MT-BULK |
| Product SKUs | |
| SYS-6018R-MT | • SuperServer 6018R-MT (Black) |
| Motherboard | |
| Super X10DRL-i | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 8x 288-pin DDR4 DIMM slots • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i210 Gigabit Ethernet controller • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 4x SATA3 (6Gbps) ports • I-SATA 4 & I-SATA 5 support SATA DOM |
| LAN | • 2x 10G SFP+ ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 4x USB 3.0 ports (2 rear, 2 headers) • 5x USB 2.0 ports (2 rear, 2 headers, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port / Header | • 2x COM ports (1 rear, 1 header) |
| DOM | • 2x SuperDOM (Disk on Module) ports |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • IPMI 2.0 • Intel® Node Manager • SuperDoctor® 5 • SSM • SPM • SUM • Watch Dog |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | CSE-813MFTQ-441CB |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 19.8″ (503mm) |
| Package | • 23.4″ (W) x 8.5″ (H) x 29.7″ (L) |
| Weight | • 36 lbs (16.33 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • Universal Information (UID) LED |
| Expansion Slots | |
| PCI-Express | • 1x PCI-E 3.0 x8 (FHHL) slot |
| Drive Bays | |
| Hot-swap | • 4x 3.5″ Hot-swap SATA3 Drive Bays |
| Backplane | |
| • SAS2/SATA3 Backplane |
|
| System Cooling | |
| Fans | • 4x 4cm fans with optimal fan speed control |
| Power Supply | |
| • 440W/480W High-Efficiency Power Supply w/PMBus 1.2, I2C, and PFC |
|
| AC Input | • 100-140V, 50-60Hz, 5.5-4A • 180-240V, 50-60Hz, 3.5-2.5A |
| +12V | • +3.3V: 15A • +5V: 18A • +5V standby: 3A • +12V: 35.8A at 100-140Vac, 39.1A at 180-240Vac |
| Certification | • Platinum Level |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
SuperServer 6018R-MTR / BULK
 |
*Note: SYS-6018R-MTR-BULK |
| Product SKUs | |
| SYS-6018R-MTR | • SuperServer 6018R-MTR (Black) |
| Motherboard | |
| Super X10DRL-i | |
| Processor/Cache | |
| CPU | • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) * • Dual Socket R3 (LGA 2011) |
| Cores / Cache | • Up to 18 Cores / Up to 45MB Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | • 8x 288-pin DDR4 DIMM slots • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM |
| Memory Type | • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
| On-Board Devices | |
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i210 Gigabit Ethernet controller • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • ASPEED AST2400 BMC |
| Input / Output | |
| SATA | • 4x SATA3 (6Gbps) ports • I-SATA 4 & I-SATA 5 support SATA DOM |
| LAN | • 2x 10G SFP+ ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 4x USB 3.0 ports (2 rear, 2 headers) • 5x USB 2.0 ports (2 rear, 2 headers, 1 Type A) |
| Video | • 1x VGA Connector |
| Serial Port / Header | • 2x COM ports (1 rear, 1 header) |
| DOM | • 2x SuperDOM (Disk on Module) ports |
| System BIOS | |
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
| Management | |
| Software | • IPMI 2.0 • Intel® Node Manager • SuperDoctor® 5 • SSM • SPM • SUM • Watch Dog |
| Power Configurations | • ACPI Power Management • Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | • 1U Rackmount |
| Model | CSE-813MFTQ-441CB |
| Dimensions and Weight | |
| Height | • 1.7″ (43mm) |
| Width | • 17.2″ (437mm) |
| Depth | • 19.8″ (503mm) |
| Package | • 23.4″ (W) x 8.5″ (H) x 29.7″ (L) |
| Weight | • 36 lbs (16.33 kg) |
| Available Color | • Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • Universal Information (UID) LED |
| Expansion Slots | |
| PCI-Express | • 1x PCI-E 3.0 x8 (FHHL) slot |
| Drive Bays | |
| Hot-swap | • 4x 3.5″ Hot-swap SATA3 Drive Bays |
| Backplane | |
| • SAS2/SATA3 Backplane |
|
| System Cooling | |
| Fans | • 4x 4cm fans with optimal fan speed control |
| Power Supply | |
| • 400W Redundant Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFC |
|
| AC Input | • 100-240V, 50-60Hz, 6-3A |
| DC Output | • +5V standby: 3A • +12V: 33A |
| DC Output With Power Distributor |
• +5V: 25A • +3.3V: 25A • -12V: 0.6A |
| Certification | • Gold Level  |
| Operating Environment / Compliance | |
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |
You must be logged in to post a comment.