SuperServer – 1U

SuperServer-1U

E5-2600 v3 + C612 based SuperServer / Socket R3 – LGA 2011 / DP Xeon
1U Xeon® E5-2600 v3 Family

Supermicro’s New Generation X10 Haswell DP SuperServer® offers numerous advantages over previous generations including the highest levels of performance, efficiency, security and scalability in the industry.

SuperServer 1028U-TN10RT+ (Complete System Only)

SYS-1028U-TN10RT_
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 3x PCI-E 3.0 x8 slots
    (2x FH 10.5″ L, 1x LP)
  4. 2x 10GBase-T ports
  5. 10x 2.5″ Hot-swap Drive Bays:
    6x NVMe ports (NVMe from CPU 1);
    4x NVMe/SAS3 hybrid ports for optional
    SAS3/SATA3 (NVMe from CPU 2)
  6. 8x heavy duty fans w/ optimal fan speed control
  7. 1000W Redundant Power Supplies
    Titanium Level (96%)

Product SKUs
SYS-1028U-TN10RT+ • SuperServer 1028U-TN10RT+ (Black)
Motherboard
Super X10DRU-i+ 
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 2x 10GBase-T ports via AOC-URN6-i2XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
NVMe/SAS • 6x NVMe ports (NVMe from CPU 1)
• 4x NVMe/SAS3 Hybrid ports (NVMe from CPU 2)
LAN • 2x RJ45 10GBase-T ports
• 1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video 1x VGA Connector
Serial Port • 1x Serial header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UAC2-R1K02
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.8″ (707mm)
Weight 48 lbs (21.8 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System UID button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• UID LED
Expansion Slots
PCI-Express • 3x PCI-E 3.0 x8 slots (2x Full-height 10.5″ L; 1x Low-profile)
Drive Bays
Hot-swap • 10x 2.5″ Hot-swap drive bays
• 6x NVMe ports (NVMe from CPU 1)
• 4x NVMe/SAS3 hybrid ports for optional SAS3/SATA3 (NVMe from CPU 2)
System Cooling
Fans • 8x heavy duty fans with optimal fan speed control
Air Shroud • 1x Air Shroud
Power Supply
• 1000W Redundant Titanium Level (96%) Single Output Power Supplies
AC Input • 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac) & Min: 0A
12V SB Max: 2.1A
• Min: 0A
Certification • Titanium Level   80Plus_w35_titanium  96_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028U-E1CR4+ (Complete System Only)

SYS-1028U-E1CRTP_
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L),
    2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 4x Gigabit Ethernet LAN ports
  5. 10x Hot-swap 2.5″ drive bays:
    10x SAS3/SATA3 ports via
    Expander and AOC:
    AOC-S3108L-H8iR, AOC-S3008L-L8e,
    AOC-S3008L-L8i
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-1028U-E1CR4+ • SuperServer 1028U-E1CR4+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 2x 10GBase-T ports via AOC-URN6-i2XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SAS 10x SAS3 ports support via expander and storage Add-on Cards
One of the following storage Add-on cards required:• AOC-S3108-H8iR-16DD (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3) 16HDD• AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)• AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)• AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)
LAN • 4x RJ45 GbE LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video 1x VGA Connector
Serial Port • 1x Serial header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UTS-R751P-T
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.8″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
Drive Bays
Hot-swap • 10x 2.5″ Hot-swap drives supported via expander
System Cooling
Fans • 5x heavy duty fans with optimal fan speed control
• 3x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028U-E1CRTP+ (Complete System Only)

SYS-1028U-E1CRTP_
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L),
    2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 4x Gigabit Ethernet LAN ports
  5. 10x Hot-swap 2.5″ drive bays:
    10x SAS3/SATA3 ports via
    Expander and AOC:
    AOC-S3108L-H8iR, AOC-S3008L-L8e,
    AOC-S3008L-L8i
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-1028U-E1CRTP+ • SuperServer 1028U-E1CRTP+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity 2x GbE and 2x SFP+ ports via AOC-URN2-I4GXS
• Intel® i350 Gigabit Ethernet Controller
• Intel® X710 10G SFP+
• 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SAS 10x SAS3 ports support via expander and storage Add-on Cards

• One of the following storage Add-on cards required:

AOC-S3108-H8iR-16DD (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3) 16HDD

AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)

AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)

AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)

LAN • 2x RJ45 GbE LAN ports
• 2x 10G SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video 1x VGA Connector
Serial Port • 1x Serial header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UTS-R751P-T
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.8″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
Drive Bays
Hot-swap • 10x 2.5″ Hot-swap drives supported via expander
System Cooling
Fans • 5x heavy duty fans with optimal fan speed control
• 3x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028U-TR4+ (Complete System Only)

logo_Global_SKU_140x140SYS-1028U-TR4T_
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L),
    2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 4x Gigabit Ethernet ports
  5. 10x Hot-swap 2.5″ Drive Bays:
    10x SATA3 ports by default; optional
    8x SAS3 ports
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-1028U-TR4+ • SuperServer 1028U-TR4+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity 4x 10GBase-T ports via AOC-UR-i4G
• Intel® i350 Gigabit Ethernet Controller
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 8x SAS3 ports support via optional Add-on Card
LAN • 4x RJ45 Gigabit Ethernet ports
• 1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video 1x VGA Connector
Serial Port • 1x Serial header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UAC-R750
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.8″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
Drive Bays
Hot-swap • 10x 2.5″ Hot-swap drives supported via expander
System Cooling
Fans • 4x heavy duty fans with optimal fan speed control
• 4x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028U-TR4T+ (Complete System Only)

logo_Global_SKU_140x140SYS-1028U-TR4T_
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz; 24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L), 2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 4x 10GBase-T ports
  5. 10x Hot-swap 2.5″ Drive Bays:
    10x SATA3 ports by default; optional
    8x SAS3 ports
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-1028U-TR4T+ • SuperServer 1028U-TR4T+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity 4x 10GBase-T ports via AOC-UR-i4G
• Intel® i350 Gigabit Ethernet Controller
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 8x SAS3 ports support via optional Add-on Card
LAN • 4x RJ45 Gigabit Ethernet ports
• 1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video 1x VGA Connector
Serial Port • 1x Serial header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UAC-R750
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.8″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
Drive Bays
Hot-swap • 10x 2.5″ Hot-swap drives supported via expander
System Cooling
Fans • 4x heavy duty fans with optimal fan speed control
• 4x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028U-TRT+ (Complete System Only)

logo_Global_SKU_140x140
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz; 24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L), 2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 4x 10GBase-T ports
  5. 10x Hot-swap 2.5″ Drive Bays:
    10x SATA3 ports by default; optional
    8x SAS3 ports
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-1028U-TRT+ • SuperServer 1028U-TRT+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity 2x 10GBase-T ports via AOC-UR-i2XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 10x SATA3 (6Gbps) ports
SAS • 8x SAS3 ports support via optional Add-on Card
LAN • 4x RJ45 Gigabit Ethernet ports
• 1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video 1x VGA Connector
Serial Port • 1x Serial header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UAC-R750
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.8″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
Drive Bays
Hot-swap • 10x 2.5″ Hot-swap drives supported via expander
System Cooling
Fans • 4x heavy duty fans with optimal fan speed control
• 4x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028U-TNRTP+ (Complete System Only)

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L),
    2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 2x 10G SFP+ ports
  5. 10x Hot-swap 2.5″ Drive Bays:
    Default 8x SATA3 ports and
    2x NVMe/SATA3 hybrid ports;
    Optional 8x SAS3 ports via AOC
  6. 5x heavy duty fans w/ optimal
    fan speed control
  7. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-1028U-TNRTP+ • SuperServer 1028U-TNRTP+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 2x 10GBase-T ports via AOC-URN6-i2XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA 10x SATA3 (6Gbps) ports
SAS • 8x SAS3 ports support via optional Add-on Card
NVMe • 2x NVMe ports
LAN • 2x 10G SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video 1x VGA Connector
Serial Port • 1x Serial header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UAC2-R750
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.82″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
Drive Bays
Hot-swap • 10x 2.5″ Hot-swap drive bays
• Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports
• Optional 8x SAS3 ports via AOC
System Cooling
Fans • 5x heavy duty fans with optimal fan speed control
• 3x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028U-TNR4T+ (Complete System Only)

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L),
    2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 2x 10G SFP+ ports
  5. 10x Hot-swap 2.5″ Drive Bays:
    Default 8x SATA3 ports and
    2x NVMe/SATA3 hybrid ports;
    Optional 8x SAS3 ports via AOC
  6. 5x heavy duty fans w/ optimal
    fan speed control
  7. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-1028U-TNR4T+ • SuperServer 1028U-TNR4T+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 4x 10GBase-T ports via AOC-URN2-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA 10x SATA3 (6Gbps) ports
SAS • 8x SAS3 ports support via optional Add-on Card
NVMe • 2x NVMe ports
LAN • 4x RJ45 10GBase-T ports
• 1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video 1x VGA Connector
Serial Port • 1x Serial header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UAC2-R750
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.82″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
Drive Bays
Hot-swap • 10x 2.5″ Hot-swap drive bays
• Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports
• Optional 8x SAS3 ports via AOC
System Cooling
Fans • 5x heavy duty fans with optimal fan speed control
• 3x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028U-TNRT+ (Complete System Only)

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L),
    2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 2x 10G SFP+ ports
  5. 10x Hot-swap 2.5″ Drive Bays:
    Default 8x SATA3 ports and
    2x NVMe/SATA3 hybrid ports;
    Optional 8x SAS3 ports via AOC
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-1028U-TNRT+ • SuperServer 1028U-TNRT+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity • 2x 10GBase-T ports via AOC-URN2-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA 10x SATA3 (6Gbps) ports
SAS • 8x SAS3 ports support via optional Add-on Card
NVMe • 2x NVMe ports
LAN • 2x RJ45 10GBase-T ports
• 1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video 1x VGA Connector
Serial Port • 1x Serial header
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UAC2-R750
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.82″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
Drive Bays
Hot-swap • 10x 2.5″ Hot-swap drive bays
• Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports
• Optional 8x SAS3 ports via AOC
System Cooling
Fans • 5x heavy duty fans with optimal fan speed control
• 3x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028UX-CR-LL1 (Complete System Only)

• World Record Benchmark
for Low Latency – STAC Report™
• Qualified low latency NICs

  1. Support Hyper-Speed
  2. Dual Intel® Xeon® processor
    E5-2643 v3 (Haswell)
  3. Default: 8x 8GB 2133MHz DDR4
    (16x DIMM slots, up to 1TB
    DDR4 2133MHz)
  4. Expansion slots via riser card:
    2x PCI-E 3.0 x16, Full-heigh Full-length
    1x PCI-E 3.0 x8, Low-profile
    1x PCI-E 3.0 x8 SAS3 integrated
  5. 4x Gigabit Ethernet LAN ports
  6. Integrated IPMI 2.0 with KVM and
    Dedicated LAN
  7. 10x 2.5″ Hot-swap Drive Bays:
    8x SAS3 (LSI 3108), 2x SATA3,
    2x NVMe ports support via
    optional Ultra Riser card
  8. 8x heavy duty fans w/ optimal
    fan speed control
  9. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-1028UX-CR-LL1 • SuperServer 1028UX-CR-LL1 (Black)
Motherboard
Super X10DRU-XLL
 Processor/Cache
CPU • Intel® Xeon® processor E5-2643 v3 Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 6 Cores / Up to 20MB Cache
System Bus • QPI up to 9.6 GT/s
 System Memory
Memory Capacity 8 X 8GB DDR4 2133MHz (Default)
16x 288-pin DDR4 DIMM slots
Up to 1TB ECC LRDIMM, 768GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SAS • LSI 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Graphics • ASPEED AST2400 BMC
Input / Output
SAS • 8x SAS3 (12Gbps) ports
SATA • 2x SATA3 (6Gbps) ports
NVMe • 2x NVMe ports support via optional Ultra Riser card (AOC-URN2-i2XT)
LAN • 4x RJ45 Gigabit Ethernet ports
• 1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video 1x VGA Connector
Serial Port • 1x Serial header
Serial Port / Header • 1x Fast UART 16550 serial
• 1x COM port (rear)
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UTS-R750P
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 30.6″ (777mm)
Weight 48 lbs (21.8 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express Expansion slots via riser card:
• 2x PCI-E 3.0 x16, Full-heigh Full-length
• 1x PCI-E 3.0 x8, Low-profile
• 1x PCI-E 3.0 x8 SAS3 integrated
Drive Bays
Hot-swap • 8x 2.5″ Hot-swap SAS3 drive bays
• 2x 2.5″ Hot-swap SATA3 drive bays
• Optional NVMe support: 2x NVMe via AOC-URN2-I2XT (w/ 2x 10GBase-T ports)
System Cooling
Fans • 8x heavy duty fans with optimal fan speed control
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
• CPU Core 6-Phase-switching voltage regulator
FAN • Total of ten 4-pin PWM fans
• 10x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control
Temperature Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 10x Fan Connectors
• PSU I2C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI
LED Power Fail / Overheat LED
• Suspend-state Indicator LED
• UID LED
Other Features • SDDC Support
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028UX-CR-LL2 (Complete System Only)

• World Record Benchmark
for Low Latency – STAC Report™
• Qualified low latency NICs

  1. Support Hyper-Speed
  2. Dual Intel® Xeon® processor
    E5-2643 v3 (Haswell)
  3. Default: 8x 8GB 2133MHz DDR4
    (16x DIMM slots, up to 1TB
    DDR4 2133MHz)
  4. Expansion slots via riser card:
    2x PCI-E 3.0 x16, Full-heigh Full-length
    1x PCI-E 3.0 x8, Low-profile
    1x PCI-E 3.0 x8 SAS3 integrated
  5. 4x Gigabit Ethernet LAN ports
  6. Integrated IPMI 2.0 with KVM and
    Dedicated LAN
  7. 10x 2.5″ Hot-swap Drive Bays:
    8x SAS3 (LSI 3108), 2x SATA3,
    2x NVMe ports support via
    optional Ultra Riser card
  8. 8x heavy duty fans w/ optimal
    fan speed control
  9. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-1028UX-CR-LL1 • SuperServer 1028UX-CR-LL2 (Black)
Motherboard
Super X10DRU-XLL
 Processor/Cache
CPU • Intel® Xeon® processor E5-2643 v3 Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 10 Cores / Up to 25MB Cache
System Bus • QPI up to 9.6 GT/s
 System Memory
Memory Capacity 8 X 8GB DDR4 2133MHz (Default)
16x 288-pin DDR4 DIMM slots
Up to 1TB ECC LRDIMM, 768GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SAS • LSI 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Graphics • ASPEED AST2400 BMC
Input / Output
SAS • 8x SAS3 (12Gbps) ports
SATA • 2x SATA3 (6Gbps) ports
NVMe • 2x NVMe ports support via optional Ultra Riser card (AOC-URN2-i2XT)
LAN • 4x RJ45 Gigabit Ethernet ports
• 1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video 1x VGA Connector
Serial Port • 1x Serial header
Serial Port / Header • 1x Fast UART 16550 serial
• 1x COM port (rear)
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UTS-R750P
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 30.6″ (777mm)
Weight 48 lbs (21.8 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express Expansion slots via riser card:
• 2x PCI-E 3.0 x16, Full-heigh Full-length
• 1x PCI-E 3.0 x8, Low-profile
• 1x PCI-E 3.0 x8 SAS3 integrated
Drive Bays
Hot-swap • 8x 2.5″ Hot-swap SAS3 drive bays
• 2x 2.5″ Hot-swap SATA3 drive bays
• Optional NVMe support: 2x NVMe via AOC-URN2-I2XT (w/ 2x 10GBase-T ports)
System Cooling
Fans • 8x heavy duty fans with optimal fan speed control
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
• CPU Core 6-Phase-switching voltage regulator
FAN • Total of ten 4-pin PWM fans
• 10x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control
Temperature Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 10x Fan Connectors
• PSU I2C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI
LED Power Fail / Overheat LED
• Suspend-state Indicator LED
• UID LED
Other Features • SDDC Support
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6018U-TRTP+ (Complete System Only)

logo_Global_SKU_140x140
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L),
    2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 4x 10GBase-T ports
  5. 4x 3.5″ Hot-swap Drive Bays
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. I/O ports: 2x SuperDOM, 1x VGA,
    1x Serial, 5x USB 3.0
  8. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-6018U-TRTP+ • SuperServer 6018U-TRTP+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity 2x 10G SFP+ ports via AOC-URN2-I2XS
• Intel® 82599ES 10G SFP+
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 4x SATA3 (6Gbps) ports
LAN 2x 10G SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video 1x VGA Connector
Serial Port 1x Serial header
DOM • 2x SATA DOM (Disk on Module) support with embedded power
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UAC-R750
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.8″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 4x 3.5″ Hot-swap drive bays
System Cooling
Fans • 4x heavy duty fans with optimal fan speed control
• 4x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6018U-TR4+ (Complete System Only)

logo_Global_SKU_140x140
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L),
    2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 4x 10GBase-T ports
  5. 4x 3.5″ Hot-swap Drive Bays
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. I/O ports: 2x SuperDOM, 1x VGA,
    1x Serial, 5x USB 3.0
  8. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-6018U-TR4+ • SuperServer 6018U-TR4+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity 2x 10G SFP+ ports via AOC-URN2-I2XS
• Intel® 82599ES 10G SFP+
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 4x SATA3 (6Gbps) ports
LAN 2x 10G SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video 1x VGA Connector
Serial Port 1x Serial header
DOM • 2x SATA DOM (Disk on Module) support with embedded power
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UAC-R750
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.8″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 4x 3.5″ Hot-swap drive bays
System Cooling
Fans • 4x heavy duty fans with optimal fan speed control
• 4x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6018U-TR4T+ (Complete System Only)

logo_Global_SKU_140x140
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L),
    2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 4x 10GBase-T ports
  5. 4x 3.5″ Hot-swap Drive Bays
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. I/O ports: 2x SuperDOM, 1x VGA,
    1x Serial, 5x USB 3.0
  8. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-6018U-TR4T+ • SuperServer 6018U-TR4T+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity 4x 10GBase-T ports via AOC-UR-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 4x SATA3 (6Gbps) ports
LAN 2x 10G SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video 1x VGA Connector
Serial Port 1x Serial header
DOM • 2x SATA DOM (Disk on Module) support with embedded power
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UAC-R750
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.8″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 4x 3.5″ Hot-swap drive bays
System Cooling
Fans • 4x heavy duty fans with optimal fan speed control
• 4x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6018U-TRT+ (Complete System Only)

logo_Global_SKU_140x140
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz;
    24x DIMM slots
  3. 2x PCI-E 3.0 x16 slots (FH, 10.5″ L),
    2x PCI-E 3.0 x8 slots (LP, 1 internal)
  4. 2x 10GBase-T ports
  5. 4x 3.5″ Hot-swap Drive Bays
  6. 4x heavy duty fans w/ optimal
    fan speed control
  7. I/O ports: 2x SuperDOM, 1x VGA,
    1x Serial, 5x USB 3.0
  8. 750W Redundant Power Supplies
    Platinum Level (94%+)

Product SKUs
SYS-6018U-TRT+ • SuperServer 6018U-TRT+ (Black)
Motherboard
Super X10DRU-i+
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity 2x 10GBase-T ports via AOC-UR-i4XT
• Intel® X540 10GBase-T
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 4x SATA3 (6Gbps) ports
LAN 2x 10G SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video 1x VGA Connector
Serial Port 1x Serial header
DOM • 2x SATA DOM (Disk on Module) support with embedded power
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-119UAC-R750
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 27.8″ (707mm)
Weight Net Weight: 26 lbs (11.8 kg)
• Gross Weight: 41 lbs (18.6 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED /
• UID LED
Expansion Slots
PCI-Express • 2x PCI-E 3.0 x16 slots (Full-height, 10.5″ L)
• 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap • 4x 3.5″ Hot-swap drive bays
System Cooling
Fans • 4x heavy duty fans with optimal fan speed control
• 4x additional fans optional
Air Shroud • 1x Air Shroud
Power Supply
• 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input • 100-127Vac, 50-60Hz
• 200-240Vac, 50-60Hz
+12V Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB Max: 2.1A
• Min: 0A
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
PC Health Monitoring
Voltage • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator
FAN • 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI
LED Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID
Other Features • 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028TR-T

Two systems (nodes) in a 1U form factor. Each node supports the following:

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 512GB ECC DDR4, up to 2133MHz;
    8x DIMM slots
  3. 1x PCI-E 3.0 x16 (in x16) slot
  4. 4x 2.5″ Hot-swap SAS/SATA HDD bays
  5. Intel® i350 Dual port GbE LAN
  6. I/O ports: 2x SuperDOM, 1x VGA,
    1x COM, 2x USB 2.0 (rear)
  7. 1000W High-efficiency Power Supply
    Titanium Level Certified

Product SKUs
SYS-1028TR-T • SuperServer 1028TR-T (Black)
Motherboard
Super X10DRT-L
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity 8x 288-pin DDR4 DIMM slots
• Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Controllers Intel® i350 Dual Port Gigabit Ethernet
• Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Video • ASPEED AST2400 BMC
Input / Output
Serial ATA • 10x SATA3 (6Gbps) ports
LAN 2x 10G SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 2x USB 2.0 ports (rear)
Video 1x VGA Connector
Serial Port / Header 1x COM port (1 header)
DOM • 2x SuperDOM (Disk on Module) ports
Management
Software • Intel® Node Manager
• IPMI 2.0
• NMI
• SuperDoctor® 5
• Watch Dog
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Twin
Model • CSE-809BTQ-1K03B
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 1.7″ (43mm)
Depth 27.75″ (705mm)
Gross Weight 43 lbs (19.5kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
• UID button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 (in x16) slot
Drive Bays
Hot-swap • 4x 2.5″ Hot-swap HDD trays
System Cooling
Fans • 3x 40x56mm counter-rotation PWM fan
Power Supply
• 1000W Titanium Level (96%) High-efficiency AC-DC power supply with PMBus and I2C
AC Input • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output 4 Amp @ +5V standby
• 75 Amp @ +12V
Certification • Titanium Level Certified  
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• PCI 2.3
• ACPI 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028TR-TF

Two systems (nodes) in a 1U form factor. Each node supports the following:

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 512GB ECC DDR4, up to 2133MHz;
    8x DIMM slots
  3. 1x PCI-E 3.0 x16 (in x16) slot
  4. 4x 2.5″ Hot-swap SAS/SATA HDD bays
  5. Single port IB (FDR, 56Gbps),
    w/ QSFP connector
  6. Intel® i350 Dual port GbE LAN
  7. I/O ports: 2x SuperDOM, 1x VGA,
    1x COM, 2x USB 2.0 (rear)
  8. 1000W High-efficiency Power Supply
    Titanium Level Certified

Product SKUs
SYS-1028TR-TF • SuperServer 1028TR-TF (Black)
Motherboard
Super X10DRT-LIBF
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity 8x 288-pin DDR4 DIMM slots
• Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Controllers Intel® i350 Dual Port Gigabit Ethernet
• Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Video • ASPEED AST2400 BMC
Input / Output
Serial ATA • 10x SATA3 (6Gbps) ports
LAN 2x 10G SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 2x USB 2.0 ports (rear)
Video 1x VGA Connector
Serial Port / Header 1x COM port (1 header)
DOM • 2x SuperDOM (Disk on Module) ports
Management
Software • Intel® Node Manager
• IPMI 2.0
• NMI
• SuperDoctor® 5
• Watch Dog
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Twin
Model • CSE-809BTQ-1K03B
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 1.7″ (43mm)
Depth 27.75″ (705mm)
Gross Weight 43 lbs (19.5kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
• UID button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 (in x16) slot
Drive Bays
Hot-swap • 4x 2.5″ Hot-swap HDD trays
System Cooling
Fans • 3x 40x56mm counter-rotation PWM fan
Power Supply
• 1000W Titanium Level (96%) High-efficiency AC-DC power supply with PMBus and I2C
AC Input • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output 4 Amp @ +5V standby
• 75 Amp @ +12V
Certification • Titanium Level Certified  
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• PCI 2.3
• ACPI 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6018TR-T

Two systems (nodes) in a 1U form factor. Each node supports the following:

  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 512GB ECC DDR4, up to 2133MHz;
    8x DIMM slots
  3. 1x PCI-E 3.0 x16 (in x16) slot
  4. 2x 3.5″ Hot-swap SAS/SATA drive bays
  5. Intel® i350 Dual port GbE LAN
  6. I/O ports: 2x SuperDOM, 1x VGA,
    1x COM, 2x USB 2.0 (rear)
  7. 1000W High-efficiency Power Supply
    Titanium Level Certified

Product SKUs
SYS-6018TR-T • SuperServer 1028TR-TF (Black)
Motherboard
Super X10DRT-L
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity 8x 288-pin DDR4 DIMM slots
• Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Controllers Intel® i350 Dual Port Gigabit Ethernet
• Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Video • ASPEED AST2400 BMC
Input / Output
Serial ATA • 10x SATA3 (6Gbps) ports
LAN 2x 10G SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 2x USB 2.0 ports (rear)
Video 1x VGA Connector
Serial Port / Header 1x COM port (1 header)
DOM • 2x SuperDOM (Disk on Module) ports
Management
Software • Intel® Node Manager
• IPMI 2.0
• NMI
• SuperDoctor® 5
• Watch Dog
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Twin
Model • CSE-808TS-1K03B
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 1.75″ (44.45mm)
Depth 27.75″ (705mm)
Gross Weight 43 lbs (19.5kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
• UID button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 (in x16) slot
Drive Bays
Hot-swap • 2x 3.5″ Hot-swap drive bays
System Cooling
Fans • 3x 40x56mm counter-rotation PWM fan
Power Supply
• 1000W Titanium Level (96%) High-efficiency AC-DC power supply with PMBus and I2C
AC Input • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output 4 Amp @ +5V standby
• 75 Amp @ +12V
Certification • Titanium Level Certified  
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• PCI 2.3
• ACPI 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028R-MCTR

  • Data Center Optimized
  • 2x 10GBase-T Ports
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 512GB ECC DDR4, up to 2133MHz;
    8x DIMM slots
  3. 1x PCI-E 3.0 x16 (in x16) slot
  4. 8x 2.5″ Hot-swap SAS3/SATA3
    Drive Bays
  5. Intel® i210 Dual-Port 1GbE LAN
    Intel® X540 Dual-Port 10GBase-T LAN
  6. SAS3 (12Gbps) via LSI 3108
  7. I/O ports: 1x VGA, 2x USB 3.0
  8. 600W Redundant High-Efficiency
    Power Supplies
    Platinum Level Certified
  9. Optional 2x 2.5″ NVMe Drives Support
  10. 2x SuperDOM (Disk on Module) ports
  11. IPMI 2.0 + KVM with Dedicated LAN

Product SKUs
SYS-1028R-MCTR • SuperServer 1028R-MCTR (Black)
Motherboard
Super X10DRL-CT
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity 8x 288-pin DDR4 DIMM slots
• Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SAS • SAS3 (12Gbps) via LSI 3108
• RAID 0, 1, 5, 6, 10, 50, 60 support
• 2GB DDR3 Cache
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Controllers Intel® X540 10GBase-T controller
• Intel® i210 Gigabit Ethernet controller
• Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Video • ASPEED AST2400 BMC
Input / Output
SAS • 8x SAS3 (12Gbps) ports
SATA • 6x SATA3 (6Gbps) ports
• I-SATA 4 & I-SATA 5 support SATA DOM
LAN 2x RJ45 10GBase-T LAN ports
• 2x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 4x USB 3.0 ports (2 rear, 2 headers)
• 3x USB 2.0 ports (2 headers, 1 Type A)
Video 1x VGA Connector
Serial Port / Header 1x COM port (1 header)
DOM • 2x SuperDOM (Disk on Module) ports
Management
Software • IPMI 2.0
• Intel® Node Manager 3.0
• SuperDoctor® 5
• SSM
• SPM
• SUM
• Watch Dog
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-113MFAC2-R606CB
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 1.7″ (43mm)
Depth 19.98″ (508mm)
Package 24″ (W) x 8.3″ (H) x 30″ (L)
Gross Weight 40 lbs (18.15 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
• UID button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 (in x16) slot
Drive Bays
Hot-swap • 8x 2.5″ Hot-swap SAS3/SATA3 Drive Bays
Peripheral Drives
DVD-ROM • 1x Slim DVD-ROM drive (optional)
Backplane
• SAS3/SATA3 Backplane
• Optional 2x 2.5″ NVMe drives
System Cooling
Fans • 4x 4cm fans with optimal fan speed control
Power Supply
• 600W Redundant High-Efficiency Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFC
AC Input • 100-240V, 50-60Hz, 7.5-3.0A
DC Output +5V standby: 3A
• +12V: 50A
Certification Platinum Certified   
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• PCI 2.3
• ACPI 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 1028R-MCT

  • Data Center Optimized
  • 2x 10GBase-T Ports
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 512GB ECC DDR4, up to 2133MHz;
    8x DIMM slots
  3. 1x PCI-E 3.0 x16 (in x16) slot
  4. 8x 2.5″ Hot-swap SAS3/SATA3
    Drive Bays
  5. Intel® i210 Dual-Port 1GbE LAN
    Intel® X540 Dual-Port 10GBase-T LAN
  6. SAS3 (12Gbps) via LSI 3108
  7. I/O ports: 1x VGA, 2x USB 3.0
  8. 600W Redundant High-Efficiency
    Power Supplies
    Platinum Level Certified
  9. Optional 2x 2.5″ NVMe Drives Support
  10. 2x SuperDOM (Disk on Module) ports
  11. IPMI 2.0 + KVM with Dedicated LAN

Product SKUs
SYS-1028R-MCT • SuperServer 1028R-MCT (Black)
Motherboard
Super X10DRL-CT
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity 8x 288-pin DDR4 DIMM slots
• Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SAS • SAS3 (12Gbps) via LSI 3108
• RAID 0, 1, 5, 6, 10, 50, 60 support
• 2GB DDR3 Cache
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Controllers Intel® X540 10GBase-T controller
• Intel® i210 Gigabit Ethernet controller
• Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Video • ASPEED AST2400 BMC
Input / Output
SAS • 8x SAS3 (12Gbps) ports
SATA • 6x SATA3 (6Gbps) ports
• I-SATA 4 & I-SATA 5 support SATA DOM
LAN 2x RJ45 10GBase-T LAN ports
• 2x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 4x USB 3.0 ports (2 rear, 2 headers)
• 3x USB 2.0 ports (2 headers, 1 Type A)
Video 1x VGA Connector
Serial Port / Header 1x COM port (1 header)
DOM • 2x SuperDOM (Disk on Module) ports
Management
Software • IPMI 2.0
• Intel® Node Manager 3.0
• SuperDoctor® 5
• SSM
• SPM
• SUM
• Watch Dog
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model • CSE-113MFAC2-605CB
Dimensions and Weight
Width • 17.2″ (437mm)
Height • 1.7″ (43mm)
Depth 19.98″ (508mm)
Package 24″ (W) x 8.3″ (H) x 30″ (L)
Gross Weight 38 lbs (18.15 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
• UID button
LEDs • Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x16 (in x16) slot
Drive Bays
Hot-swap • 8x 2.5″ Hot-swap SAS3/SATA3 Drive Bays
Peripheral Drives
DVD-ROM • 1x Slim DVD-ROM drive (optional)
Backplane
• SAS3/SATA3 Backplane
• Optional 2x 2.5″ NVMe drives
System Cooling
Fans • 4x 4cm fans with optimal fan speed control
Power Supply
• 600W Redundant High-Efficiency Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFC
AC Input • 100-240V, 50-60Hz, 7.5-3.0A
DC Output +5V standby: 3A
• +12V: 50A
Certification Platinum Certified   
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• PCI 2.3
• ACPI 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6018R-MT / BULK

logo_Global_SKU_140x140
  • Data Center Optimized
  • Short Depth
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 512GB ECC DDR4 DDR4, up to
    2133MHz ; 8 DIMM slots
  3. 1x PCI-E 3.0 x16 (in x16) slot
  4. 4x 3.5″ Hot-swap SATA3 Drive Bays
  5. Intel® i210 Dual-port 1GbE LAN
  6. I/O ports: 1x VGA, 1x COM,
    2x USB 3.0, 2x USB 2.0
  7. 440W/480W High-efficiency Power
    Supply, Platinum Level Certified
  8. 2x SuperDOM (Disk on Module) ports
  9. IPMI 2.0 + KVM with Dedicated LAN

*Note: SYS-6018R-MT-BULK
Available as Cost Optimized, Bulk
Packing – 10 systems in one carton

Product SKUs
SYS-6018R-MT • SuperServer 6018R-MT (Black)
Motherboard
Super X10DRL-i
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity 8x 288-pin DDR4 DIMM slots
• Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity Intel® i210 Gigabit Ethernet controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 4x SATA3 (6Gbps) ports
• I-SATA 4 & I-SATA 5 support SATA DOM
LAN 2x 10G SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 4x USB 3.0 ports (2 rear, 2 headers)
• 5x USB 2.0 ports
(2 rear, 2 headers, 1 Type A)
Video 1x VGA Connector
Serial Port / Header 2x COM ports (1 rear, 1 header)
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • IPMI 2.0
• Intel® Node Manager
• SuperDoctor® 5
• SSM
• SPM
• SUM
• Watch Dog
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model CSE-813MFTQ-441CB
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 19.8″ (503mm)
Package 23.4″ (W) x 8.5″ (H) x 29.7″ (L)
Weight 36 lbs (16.33 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x8 (FHHL) slot
Drive Bays
Hot-swap • 4x 3.5″ Hot-swap SATA3 Drive Bays
Backplane
• SAS2/SATA3 Backplane
System Cooling
Fans • 4x 4cm fans with optimal fan speed control
Power Supply
• 440W/480W High-Efficiency Power Supply w/PMBus 1.2, I2C, and PFC
AC Input • 100-140V, 50-60Hz, 5.5-4A
• 180-240V, 50-60Hz, 3.5-2.5A
+12V +3.3V: 15A
• +5V: 18A
• +5V standby: 3A
• +12V: 35.8A at 100-140Vac, 39.1A at 180-240Vac
Certification • Platinum Level  80Plus_w35_platinum  94_ps_40x37
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

SuperServer 6018R-MTR / BULK

logo_Global_SKU_140x140
  • Data Center Optimized
  • Short Depth
  1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v3 family; QPI up to 9.6GT/s
  2. Up to 512GB ECC DDR4 DDR4, up to
    2133MHz ; 8 DIMM slots
  3. 1x PCI-E 3.0 x16 (in x16) slot
  4. 4x 3.5″ Hot-swap SATA3 Drive Bays
  5. Intel® i210 Dual-port 1GbE LAN
  6. I/O ports: 1x VGA, 1x COM,
    2x USB 3.0, 2x USB 2.0
  7. 400W Redundant Power Supplies
    Gold Level Certified
  8. 2x SuperDOM (Disk on Module) ports
  9. IPMI 2.0 + KVM with Dedicated LAN

*Note: SYS-6018R-MTR-BULK
Available as Cost Optimized, Bulk
Packing – 10 systems in one carton

Product SKUs
SYS-6018R-MTR • SuperServer 6018R-MTR (Black)
Motherboard
Super X10DRL-i
 Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 18 Cores / Up to 45MB Cache
System Bus • QPI up to 9.6 GT/s
Note  * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 System Memory
Memory Capacity 8x 288-pin DDR4 DIMM slots
• Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network Connectivity Intel® i210 Gigabit Ethernet controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input / Output
SATA • 4x SATA3 (6Gbps) ports
• I-SATA 4 & I-SATA 5 support SATA DOM
LAN 2x 10G SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 4x USB 3.0 ports (2 rear, 2 headers)
• 5x USB 2.0 ports
(2 rear, 2 headers, 1 Type A)
Video 1x VGA Connector
Serial Port / Header 2x COM ports (1 rear, 1 header)
DOM • 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software • IPMI 2.0
• Intel® Node Manager
• SuperDoctor® 5
• SSM
• SPM
• SUM
• Watch Dog
Power Configurations • ACPI Power Management
• Power-on mode for AC power recovery
Chassis
Form Factor • 1U Rackmount
Model CSE-813MFTQ-441CB
Dimensions and Weight
Height • 1.7″ (43mm)
Width • 17.2″ (437mm)
Depth 19.8″ (503mm)
Package 23.4″ (W) x 8.5″ (H) x 29.7″ (L)
Weight 36 lbs (16.33 kg)
Available Color • Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
Hard drive activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED
Expansion Slots
PCI-Express • 1x PCI-E 3.0 x8 (FHHL) slot
Drive Bays
Hot-swap • 4x 3.5″ Hot-swap SATA3 Drive Bays
Backplane
• SAS2/SATA3 Backplane
System Cooling
Fans • 4x 4cm fans with optimal fan speed control
Power Supply
• 400W Redundant Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFC
AC Input • 100-240V, 50-60Hz, 6-3A
DC Output • +5V standby: 3A
• +12V: 33A
DC Output
With Power Distributor
+5V: 25A
• +3.3V: 25A
• -12V: 0.6A
Certification • Gold Level 
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)

Top